[openib-general] [PATCH] reformat code to within 80 columns
Sean Hefty
mshefty at ichips.intel.com
Thu Oct 7 11:55:22 PDT 2004
On Thu, 7 Oct 2004 11:49:43 -0700
Sean Hefty <mshefty at ichips.intel.com> wrote:
> Only purpose of patch is to reformat code to keep it within 80 columns. The resulting code highlights some areas where we may want to look at restructing it.
>
> - Sean
Same purpose - different file... SMI code, which was not in last patch.
Index: access/ib_smi.c
===================================================================
--- access/ib_smi.c (revision 953)
+++ access/ib_smi.c (working copy)
@@ -319,7 +319,8 @@
}
spin_unlock_irqrestore(&ib_smi_port_list_lock, flags);
if (!port_priv) {
- printk(KERN_ERR "smp_send: no matching MAD agent 0x%x\n", (unsigned int)mad_agent);
+ printk(KERN_ERR "smp_send: no matching MAD agent 0x%x\n",
+ (unsigned int)mad_agent);
return;
}
@@ -424,7 +425,8 @@
}
if (smi_check_forward_smp(mad_agent, smp)) {
- smi_send_smp(mad_agent, smp, mad_recv_wc, mad_recv_wc->wc->slid);
+ smi_send_smp(mad_agent, smp, mad_recv_wc,
+ mad_recv_wc->wc->slid);
return 0;
}
@@ -451,7 +453,8 @@
/* Hold lock longer !!! */
spin_unlock_irqrestore(&ib_smi_port_list_lock, flags);
if (!port_priv) {
- printk(KERN_ERR "smi_send_handler: no matching MAD agent 0x%x\n", (unsigned int)mad_agent);
+ printk(KERN_ERR "smi_send_handler: no matching MAD agent "
+ "0x%x\n", (unsigned int)mad_agent);
return;
}
@@ -510,7 +513,8 @@
/* First, check if port already open for SMI */
spin_lock_irqsave(&ib_smi_port_list_lock, flags);
list_for_each_entry(entry, &ib_smi_port_list, port_list) {
- if (entry->mad_agent->device == device && entry->port_num == port_num) {
+ if (entry->mad_agent->device == device &&
+ entry->port_num == port_num) {
port_priv = entry;
break;
}
@@ -542,7 +546,8 @@
bitmap_zero((unsigned long *)®_req.method_mask, IB_MGMT_MAX_METHODS);
set_bit(IB_MGMT_METHOD_GET, (unsigned long *)®_req.method_mask);
set_bit(IB_MGMT_METHOD_SET, (unsigned long *)®_req.method_mask);
- set_bit(IB_MGMT_METHOD_TRAP_REPRESS, (unsigned long *)®_req.method_mask);
+ set_bit(IB_MGMT_METHOD_TRAP_REPRESS,
+ (unsigned long *)®_req.method_mask);
port_priv->mad_agent = ib_register_mad_agent(device, port_num,
IB_QPT_SMI,
@@ -582,7 +587,8 @@
spin_lock_irqsave(&ib_smi_port_list_lock, flags);
list_for_each_entry(entry, &ib_smi_port_list, port_list) {
- if (entry->mad_agent->device == device && entry->port_num == port_num) {
+ if (entry->mad_agent->device == device &&
+ entry->port_num == port_num) {
port_priv = entry;
break;
}
More information about the general
mailing list