[openib-general] Re: gen2 opensm

[Michael S. Tsirkin]

Quoting r. Roland Fehrenbacher <rf at q-leap.de>:
> Subject: Re: gen2 opensm
> 
> >>>>> "Michael" == Michael S Tsirkin <mst at mellanox.co.il> writes:
> 
>     Michael> Quoting r. Roland Fehrenbacher
>     Michael> <Roland.Fehrenbacher at transtec.de>:
>     >> Subject: Re: gen2 opensm I couldn't do a firmware update yet,
>     >> since I haven't gotten Mellanox mst to compile with kernel
>     >> 2.6.11. Do you have another suggestion how I could do the
>     >> upgrade?
>     >> 
>     >> Thanks,
>     >> 
>     >> Roland
> 
>     Michael> Yes, use mstflint from src/userspace/mstflint Latest gold
>     Michael> disk in general and mst in particular does not support
>     Michael> 2.6.11
> 
> I get 
> 
> $ mstflint -d /proc/bus/pci/03/00.0 q
> Image type: FailSafe
> Chip rev.:  A1
> GUIDs:      0002c9020000771c 0002c9020000771d 0002c9020000771e 0002c9020000771f
> Board ID:    (MT_0030000001)
> 
> What would be the right way to flash this card using the files from 
> 
> fw-23108-rel-3_3_2/
> fw-23108-rel-3_3_2/fw-23108-a1-debug.mlx
> fw-23108-rel-3_3_2/fw-23108-a1-rel.mlx
> fw-23108-rel-3_3_2/MTLP23108_128MB.brd
> fw-23108-rel-3_3_2/MTLP23108_256MB.brd
> fw-23108-rel-3_3_2/MTLP23108_512MB.brd
> fw-23108-rel-3_3_2/MTPB23108_128MB.brd
> fw-23108-rel-3_3_2/MTPB23108_256MB.brd
> fw-23108-rel-3_3_2/BUILD_ID
> 
> Roland
> 

You want MTLP23108_128MB.brd and fw-23108-a1-rel.mlx then.

Create a binary image with infiniburn (select raw binary format),
And burn the result with mstflint.

If you select a wrong brd file, mstflint
will warn you that PSID (Board ID) is being changed.

MST

-- 
MST - Michael S. Tsirkin