[openib-general] Re: Flashing Mellanox MT23108

[Roland Fehrenbacher]

>>>>> "Michael" == Michael S Tsirkin <mst at mellanox.co.il> writes:

    Michael> With mstflint you pass in the device location: -d 03:00.0
    Michael> Otherwise its the same.

    >>  Unfortunately, now even with the raw image prepared by using
    >> infiniburn from fw-23108-a1-rel.mlx and the correct .brd, I get
    >> 
    >> mstflint -d /proc/bus/pci/03/00.0 -i fw-23108.bin b
    >> /0x00030028/ (BOOT2) - read error (Address (0x3002c) is out of
    >> image limits ) Not a valid image

    Michael> I'll check this on Sunday.  What does mstflint -d 03:00.0
    Michael> v show?

I have

mstflint -d 03:00.0 v

Failsafe image:

Invariant       /0x00000028-0x000006f7 (0x0006d0)/ (BOOT2) - OK

Primary   Image /0x00010000-0x00010107 (0x000108)/ (Pointer Sector)- OK
                /0x00030028-0x00030b3b (0x000b14)/ (BOOT2) - OK
                /0x00030b3c-0x00034aa7 (0x003f6c)/ (BOOT2) - OK
                /0x00034aa8-0x000375f3 (0x002b4c)/ (Configuration) - OK
                /0x000375f4-0x00037627 (0x000034)/ (GUID) - OK
                /0x00037628-0x00044c83 (0x00d65c)/ (DDR) - OK
                /0x00044c84-0x0004d30f (0x00868c)/ (DDR) - OK
                /0x0004d310-0x00061c03 (0x0148f4)/ (DDR) - OK
                /0x00061c04-0x0006d80b (0x00bc08)/ (DDR) - OK
                /0x0006d80c-0x0007099f (0x003194)/ (DDR) - OK
                /0x000709a0-0x0007a5af (0x009c10)/ (DDR) - OK
                /0x0007a5b0-0x0007a707 (0x000158)/ (Configuration) - OK
                /0x0007a708-0x0007a74b (0x000044)/ (Jump addresses) - OK
                /0x0007a74c-0x000841cb (0x009a80)/ (EMT Service) - OK

Secondary Image /0x00020000-0x00020107 (0x000108)/ (Pointer Sector)- OK
                /0x00090028-0x00090b3b (0x000b14)/ (BOOT2) - OK
                /0x00090b3c-0x00094aa7 (0x003f6c)/ (BOOT2) - OK
                /0x00094aa8-0x000975f3 (0x002b4c)/ (Configuration) - OK
                /0x000975f4-0x00097627 (0x000034)/ (GUID) - OK
                /0x00097628-0x000a4c83 (0x00d65c)/ (DDR) - OK
                /0x000a4c84-0x000ad30f (0x00868c)/ (DDR) - OK
                /0x000ad310-0x000c1c03 (0x0148f4)/ (DDR) - OK
                /0x000c1c04-0x000cd80b (0x00bc08)/ (DDR) - OK
                /0x000cd80c-0x000d099f (0x003194)/ (DDR) - OK
                /0x000d09a0-0x000da5af (0x009c10)/ (DDR) - OK
                /0x000da5b0-0x000da707 (0x000158)/ (Configuration) - OK
                /0x000da708-0x000da74b (0x000044)/ (Jump addresses) - OK
                /0x000da74c-0x000e41cb (0x009a80)/ (EMT Service) - OK

Roland