[openib-general] link availability

[Eitan Zahavi]

If you would like to connect to InfiniBand HCA cards - 
All you need to do is 
1. attach an IB cable between them
2. have IB stack running on each one of the machines (might be any stack you
want)
3. have an SM run on one of the machines.

My proposal is that depending on the kernel you have installed on the
machines install OpenIB (if 2.6.11 or 2.6.12) stack or Mellanox IBGD or
others (for the rest)
And then start OpenSM.  

Eitan Zahavi
Design Technology Director
Mellanox Technologies LTD
Tel:+972-4-9097208
Fax:+972-4-9593245
P.O. Box 586 Yokneam 20692 ISRAEL


> -----Original Message-----
> From: Ouissem BEN FREDJ [mailto:Ouissem.Benfredj at int-evry.fr]
> Sent: Monday, August 01, 2005 6:45 PM
> To: openib-general at openib.org
> Subject: [openib-general] link availability
> 
> Hello,
> 
> Is it possible to link directly two Infiniband cards type InfiniCom
> InfiniServ 7000 (MT23108) , without using any interconnect switch ?
> In that case, could you tell me how.
> 
> Thank you,
> Ouissem Ben Fredj
> _______________________________________________
> openib-general mailing list
> openib-general at openib.org
> http://openib.org/mailman/listinfo/openib-general
> 
> To unsubscribe, please visit
http://openib.org/mailman/listinfo/openib-general
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20050801/4eff86a2/attachment.html>