[openib-general] Re: mthca and LinuxBIOS

yhlu yhlu.kernel at gmail.com
Thu Aug 4 12:30:17 PDT 2005


ib_mthca: Mellanox InfiniBand HCA driver v0.06 (June 23, 2005)
ib_mthca: Initializing Mellanox Technologies MT25208 InfiniHost III Ex
(Tavor compatibility mode) (0000:04:00.0)
ib_mthca 0000:04:00.0: FW version 000400060002, max commands 64
ib_mthca 0000:04:00.0: FW size 6143 KB (start fcefa00000, end fcefffffff)
ib_mthca 0000:04:00.0: HCA memory size 262143 KB (start fce0000000,
end fcefffffff)
ib_mthca 0000:04:00.0: Max QPs: 16777216, reserved QPs: 1024, entry size: 256
ib_mthca 0000:04:00.0: Max CQs: 16777216, reserved CQs: 128, entry size: 64
ib_mthca 0000:04:00.0: Max EQs: 64, reserved EQs: 1, entry size: 64
ib_mthca 0000:04:00.0: reserved MPTs: 16, reserved MTTs: 16
ib_mthca 0000:04:00.0: Max PDs: 16777216, reserved PDs: 0, reserved UARs: 1
ib_mthca 0000:04:00.0: Max QP/MCG: 16777216, reserved MGMs: 0
ib_mthca 0000:04:00.0: Flags: 00370347
ib_mthca 0000:04:00.0: profile[ 0]--10/20 @ 0x      fce0000000 (size 0x 4000000)
ib_mthca 0000:04:00.0: profile[ 1]-- 0/16 @ 0x      fce4000000 (size 0x 1000000)
ib_mthca 0000:04:00.0: profile[ 2]-- 7/18 @ 0x      fce5000000 (size 0x  800000)
ib_mthca 0000:04:00.0: profile[ 3]-- 9/17 @ 0x      fce5800000 (size 0x  800000)
ib_mthca 0000:04:00.0: profile[ 4]-- 3/16 @ 0x      fce6000000 (size 0x  400000)
ib_mthca 0000:04:00.0: profile[ 5]-- 4/16 @ 0x      fce6400000 (size 0x  200000)
ib_mthca 0000:04:00.0: profile[ 6]--12/15 @ 0x      fce6600000 (size 0x  100000)
ib_mthca 0000:04:00.0: profile[ 7]-- 8/13 @ 0x      fce6700000 (size 0x   80000)
ib_mthca 0000:04:00.0: profile[ 8]--11/11 @ 0x      fce6780000 (size 0x   10000)
ib_mthca 0000:04:00.0: profile[ 9]-- 6/ 5 @ 0x      fce6790000 (size 0x     800)
ib_mthca 0000:04:00.0: HCA memory: allocated 106050 KB/256000 KB
(149950 KB free)
ib_mthca 0000:04:00.0: Allocated EQ 1 with 65536 entries
ib_mthca 0000:04:00.0: Allocated EQ 2 with 128 entries
ib_mthca 0000:04:00.0: Allocated EQ 3 with 128 entries
ib_mthca 0000:04:00.0: Setting mask 00000000000f43fe for eqn 2
ib_mthca 0000:04:00.0: Setting mask 0000000000000400 for eqn 3
ib_mthca 0000:04:00.0: NOP command IRQ test passed
<------------------------------------------------------------------------------------------------------stuck
30s
ib_mthca 0000:04:00.0: Failed to initialize queue pair table, aborting.
ib_mthca 0000:04:00.0: Clearing mask 00000000000f43fe for eqn 2
ib_mthca 0000:04:00.0: Clearing mask 0000000000000400 for eqn 3
ib_mthca: probe of 0000:04:00.0 failed with error -16


On 8/4/05, Roland Dreier <rolandd at cisco.com> wrote:
>     yhlu> i enable CCONFIG_INFINIBAND_MTHCA_DEBUG=y I didn't get any
>     yhlu> more debug info, is that depend other setting?
> 
> It shouldn't depend on anything.  mthca_dbg() gets turned into
> dev_dbg(), which just does dev_printk(KERN_DEBUG,...).  Perhaps you
> have to change your console level to see KERN_DEBUG messages?
> 
> Since you're getting to the call to mthca_init_qp_table(), there are
> mthca_dbg() calls that you should definitely be getting output from.
> 
>  - R.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>



More information about the general mailing list