[openib-general] InfiniBand Test Project === IBTP ===

Hal Rosenstock halr at voltaire.com
Wed Aug 10 06:56:23 PDT 2005


Hi Amit,

On Wed, 2005-08-10 at 09:51, Amit Krig wrote:
> Hi Matt,
> 
> I have updated the tree structure according to the replies I got (see
> below), One change from the src tree is the ulp dir under the
> userspace which I think is better.

Yes, this matches better. The one unresolved issue is whether this is in
the trunk or under utils or test.

> In order to start sharing the tests we would need to open this project
> in the svn tree.
> From Mellanox side I hope it will be simple to give Dotan Barak and My
> self (Amit Krig) permission to commit tests to this project.

One either has permission or not. Once you have permission, you can
create the structure needed.

-- Hal

> ============
> Hi All, 
> 
> I would like to propos a new InfiniBand Test Project  === IBTP === The
> proposed new dir can be under Gen2/trunk  => 
> 
> https://openib.org/svn/gen2/trunk/ibtp/
> 
> The project may contain the following tree 
>   
> 
> * tools (In this folder we will have all the scripts and automation
> utilities)
> * linux-kernel
>         * infiniband 
>                 * core 
>                 * ulps 
>                         * ipoib 
>                         * sdp 
>                         * srp 
>                         * kdapl 
>                 * iser 
> * userspace
>         * useraccess 
>         * cm
>         * management 
>                 * osm 
>                 * utils 
>         * ulps 
>                 * udapl 
>                 * mpi 
>                         
> 
>   
>  Each sub dir may have the following directories 
>            
> 
>                         * doa (Basic and simple dead or alive tests,
> up to X sec) 
>                         * functional (Full flows & long tests) 
>                         * bad machine (Destructive tests can not run
> in parallel to other tests) 
>                         * Scratch (New tests that did not integrated
> yet) 
>                         * Doc 
>                                 
> 
> We should decide on the relevant document/format attached to each test
> such as 
> 
>         * README file 
>         * Test runner 
>         * Config file (will contain several cmd options to run the
> test and maybe will be used by the external auto run script) 
> 
>                 
>                 
> 
>                  Amit Krig 
>         Mellanox Technologies 
>         SW/HW Design validation manager 
>         mailto:amitk at mellanox.co.il <mailto:amitk at mellanox.co.il>  
>         Work: +972-4-9097200 Ext. 315 
>         Fax: +972-4-9593245 
>          Cell: +972-544-799099 
> 
> 
> 
> 
> 
> ______________________________________________________________________
> 
> _______________________________________________
> openib-general mailing list
> openib-general at openib.org
> http://openib.org/mailman/listinfo/openib-general
> 
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general




More information about the general mailing list