[openib-general] Question

[Ronald G. Minnich]

On Mon, 28 Feb 2005, Hal Rosenstock wrote:

> opensm logs. Also, I would be curious to see what ibstat showed about
> all endport LIDs in the network. Are all the ports active that should be
> (plugged into subnet) ? 

They all look like this:

CA 'mthca0':
        CA type: MT23108
        Number of ports: 2
        Firmware version: 3.3.2
        Hardware version: a1
        Node GUID: 0x0002c90108660530
        System image GUID: 0x0002c9000100d050
        Port 1:
                State: Initializing
                Rate: 10
                Base lid: 0
                LMC: 0
                SM lid: 0
                Capability mask: 0x00500a68
                Port GUID: 0x0002c90108660531



On the front end, it is this:

CA 'mthca0':
        CA type: MT23108
        Number of ports: 2
        Firmware version: 3.3.2
        Hardware version: a1
        Node GUID: 0x0002c90108a03e60
        System image GUID: 0x0002c9000100d050
        Port 1:
                State: Initializing
                Rate: 10
                Base lid: 0
                LMC: 0
                SM lid: 0
                Capability mask: 0x00500a68
                Port GUID: 0x0002c90108a03e61
        Port 2:
                State: Down
                Rate: 2
                Base lid: 0
                LMC: 0
                SM lid: 0
                Capability mask: 0x00500a68
                Port GUID: 0x0002c90108a03e62


ron