[openib-general] Re: mstflint failing on sparc64

[Tom Duffy]

On Thu, 2005-01-06 at 23:52 +0200, Michael S. Tsirkin wrote:
> Tom, if you can try it before the weekend I'll be thankful,
> I am working on Sundays, but I dont have a sparc.

I took the plunge and tried to flash the firmware, and it took!

tat:~# ./mstflint -d /proc/bus/pci/0000\:81/00.0 q
Image type: FailSafe
Chip rev.:  A1
GUIDs:      d05f760901c90200 d15f760901c90200 d25f760901c90200 50d0000100c90200
Board ID:   guoCC ra
tat:~# ./mstflint -d /proc/bus/pci/0000\:81/00.0 -i 3-3-2.bin b
Image type: FailSafe
Chip rev.:  A1
GUIDs:      d05f760901c90200 d15f760901c90200 d25f760901c90200 50d0000100c90200
Board ID:   guoCC ra

    Burn image with follow GUIDs:
        Node:      d05f760901c90200
        Port1:     d15f760901c90200
        Port2:     d25f760901c90200
        Sys.Image: 50d0000100c90200

Read and verify Invariant Sector               - OK
Read and verify PPS/SPS in flash               - OK
Burning Secondary FW image without signatures  - OK
Restoring Secondary signature                  - OK
Burning Primary   FW image without signatures  - OK
Restoring Primary   signature                  - OK

       <reboot>

# more /sys/class/infiniband/mthca0/fw_ver
3.3.2

so, cool.

-tduffy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20050106/769f4f39/attachment.sig>