[openib-general] [PATCH][10/12] InfiniBand/core: add IsSM userspace support
Roland Dreier
roland at topspin.com
Sun Jan 23 22:14:24 PST 2005
Implement setting/clearing IsSM port capability bit from userspace via
"issm" special files (set IsSM bit on open, clear on close).
Signed-off-by: Roland Dreier <roland at topspin.com>
--- linux-bk.orig/drivers/infiniband/core/user_mad.c 2005-01-23 20:57:19.946654072 -0800
+++ linux-bk/drivers/infiniband/core/user_mad.c 2005-01-23 20:57:56.183145288 -0800
@@ -45,6 +45,7 @@
#include <linux/kref.h>
#include <asm/uaccess.h>
+#include <asm/semaphore.h>
#include <ib_mad.h>
#include <ib_user_mad.h>
@@ -54,7 +55,7 @@
MODULE_LICENSE("Dual BSD/GPL");
enum {
- IB_UMAD_MAX_PORTS = 256,
+ IB_UMAD_MAX_PORTS = 64,
IB_UMAD_MAX_AGENTS = 32
};
@@ -62,6 +63,12 @@
int devnum;
struct cdev dev;
struct class_device class_dev;
+
+ int sm_devnum;
+ struct cdev sm_dev;
+ struct class_device sm_class_dev;
+ struct semaphore sm_sem;
+
struct ib_device *ib_dev;
struct ib_umad_device *umad_dev;
u8 port_num;
@@ -92,7 +99,7 @@
static dev_t base_dev;
static spinlock_t map_lock;
-static DECLARE_BITMAP(dev_map, IB_UMAD_MAX_PORTS);
+static DECLARE_BITMAP(dev_map, IB_UMAD_MAX_PORTS * 2);
static void ib_umad_add_one(struct ib_device *device);
static void ib_umad_remove_one(struct ib_device *device);
@@ -511,6 +518,54 @@
.release = ib_umad_close
};
+static int ib_umad_sm_open(struct inode *inode, struct file *filp)
+{
+ struct ib_umad_port *port =
+ container_of(inode->i_cdev, struct ib_umad_port, sm_dev);
+ struct ib_port_modify props = {
+ .set_port_cap_mask = IB_PORT_SM
+ };
+ int ret;
+
+ if (filp->f_flags & O_NONBLOCK) {
+ if (down_trylock(&port->sm_sem))
+ return -EAGAIN;
+ } else {
+ if (down_interruptible(&port->sm_sem))
+ return -ERESTARTSYS;
+ }
+
+ ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props);
+ if (ret) {
+ up(&port->sm_sem);
+ return ret;
+ }
+
+ filp->private_data = port;
+
+ return 0;
+}
+
+static int ib_umad_sm_close(struct inode *inode, struct file *filp)
+{
+ struct ib_umad_port *port = filp->private_data;
+ struct ib_port_modify props = {
+ .clr_port_cap_mask = IB_PORT_SM
+ };
+ int ret;
+
+ ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props);
+ up(&port->sm_sem);
+
+ return ret;
+}
+
+static struct file_operations umad_sm_fops = {
+ .owner = THIS_MODULE,
+ .open = ib_umad_sm_open,
+ .release = ib_umad_sm_close
+};
+
static struct ib_client umad_client = {
.name = "umad",
.add = ib_umad_add_one,
@@ -519,17 +574,18 @@
static ssize_t show_dev(struct class_device *class_dev, char *buf)
{
- struct ib_umad_port *port =
- container_of(class_dev, struct ib_umad_port, class_dev);
+ struct ib_umad_port *port = class_get_devdata(class_dev);
- return print_dev_t(buf, port->dev.dev);
+ if (class_dev == &port->class_dev)
+ return print_dev_t(buf, port->dev.dev);
+ else
+ return print_dev_t(buf, port->sm_dev.dev);
}
static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL);
static ssize_t show_ibdev(struct class_device *class_dev, char *buf)
{
- struct ib_umad_port *port =
- container_of(class_dev, struct ib_umad_port, class_dev);
+ struct ib_umad_port *port = class_get_devdata(class_dev);
return sprintf(buf, "%s\n", port->ib_dev->name);
}
@@ -537,8 +593,7 @@
static ssize_t show_port(struct class_device *class_dev, char *buf)
{
- struct ib_umad_port *port =
- container_of(class_dev, struct ib_umad_port, class_dev);
+ struct ib_umad_port *port = class_get_devdata(class_dev);
return sprintf(buf, "%d\n", port->port_num);
}
@@ -554,11 +609,16 @@
static void ib_umad_release_port(struct class_device *class_dev)
{
- struct ib_umad_port *port =
- container_of(class_dev, struct ib_umad_port, class_dev);
+ struct ib_umad_port *port = class_get_devdata(class_dev);
+
+ if (class_dev == &port->class_dev) {
+ cdev_del(&port->dev);
+ clear_bit(port->devnum, dev_map);
+ } else {
+ cdev_del(&port->sm_dev);
+ clear_bit(port->sm_devnum, dev_map);
+ }
- cdev_del(&port->dev);
- clear_bit(port->devnum, dev_map);
kref_put(&port->umad_dev->ref, ib_umad_release_dev);
}
@@ -573,6 +633,94 @@
}
static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+static int ib_umad_init_port(struct ib_device *device, int port_num,
+ struct ib_umad_port *port)
+{
+ spin_lock(&map_lock);
+ port->devnum = find_first_zero_bit(dev_map, IB_UMAD_MAX_PORTS);
+ if (port->devnum >= IB_UMAD_MAX_PORTS) {
+ spin_unlock(&map_lock);
+ return -1;
+ }
+ port->sm_devnum = find_next_zero_bit(dev_map, IB_UMAD_MAX_PORTS * 2, IB_UMAD_MAX_PORTS);
+ if (port->sm_devnum >= IB_UMAD_MAX_PORTS * 2) {
+ spin_unlock(&map_lock);
+ return -1;
+ }
+ set_bit(port->devnum, dev_map);
+ set_bit(port->sm_devnum, dev_map);
+ spin_unlock(&map_lock);
+
+ port->ib_dev = device;
+ port->port_num = port_num;
+ init_MUTEX(&port->sm_sem);
+
+ cdev_init(&port->dev, &umad_fops);
+ port->dev.owner = THIS_MODULE;
+ kobject_set_name(&port->dev.kobj, "umad%d", port->devnum);
+ if (cdev_add(&port->dev, base_dev + port->devnum, 1))
+ return -1;
+
+ port->class_dev.class = &umad_class;
+ port->class_dev.dev = device->dma_device;
+
+ snprintf(port->class_dev.class_id, BUS_ID_SIZE, "umad%d", port->devnum);
+
+ if (class_device_register(&port->class_dev))
+ goto err_cdev;
+
+ class_set_devdata(&port->class_dev, port);
+ kref_get(&port->umad_dev->ref);
+
+ if (class_device_create_file(&port->class_dev, &class_device_attr_dev))
+ goto err_class;
+ if (class_device_create_file(&port->class_dev, &class_device_attr_ibdev))
+ goto err_class;
+ if (class_device_create_file(&port->class_dev, &class_device_attr_port))
+ goto err_class;
+
+ cdev_init(&port->sm_dev, &umad_sm_fops);
+ port->sm_dev.owner = THIS_MODULE;
+ kobject_set_name(&port->dev.kobj, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS);
+ if (cdev_add(&port->sm_dev, base_dev + port->sm_devnum, 1))
+ return -1;
+
+ port->sm_class_dev.class = &umad_class;
+ port->sm_class_dev.dev = device->dma_device;
+
+ snprintf(port->sm_class_dev.class_id, BUS_ID_SIZE, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS);
+
+ if (class_device_register(&port->sm_class_dev))
+ goto err_sm_cdev;
+
+ class_set_devdata(&port->sm_class_dev, port);
+ kref_get(&port->umad_dev->ref);
+
+ if (class_device_create_file(&port->sm_class_dev, &class_device_attr_dev))
+ goto err_sm_class;
+ if (class_device_create_file(&port->sm_class_dev, &class_device_attr_ibdev))
+ goto err_sm_class;
+ if (class_device_create_file(&port->sm_class_dev, &class_device_attr_port))
+ goto err_sm_class;
+
+ return 0;
+
+err_sm_class:
+ class_device_unregister(&port->sm_class_dev);
+
+err_sm_cdev:
+ cdev_del(&port->sm_dev);
+
+err_class:
+ class_device_unregister(&port->class_dev);
+
+err_cdev:
+ cdev_del(&port->dev);
+ clear_bit(port->devnum, dev_map);
+
+ return -1;
+}
+
static void ib_umad_add_one(struct ib_device *device)
{
struct ib_umad_device *umad_dev;
@@ -601,58 +749,20 @@
for (i = s; i <= e; ++i) {
umad_dev->port[i - s].umad_dev = umad_dev;
- kref_get(&umad_dev->ref);
-
- spin_lock(&map_lock);
- umad_dev->port[i - s].devnum =
- find_first_zero_bit(dev_map, IB_UMAD_MAX_PORTS);
- if (umad_dev->port[i - s].devnum >= IB_UMAD_MAX_PORTS) {
- spin_unlock(&map_lock);
- goto err;
- }
- set_bit(umad_dev->port[i - s].devnum, dev_map);
- spin_unlock(&map_lock);
- umad_dev->port[i - s].ib_dev = device;
- umad_dev->port[i - s].port_num = i;
-
- cdev_init(&umad_dev->port[i - s].dev, &umad_fops);
- umad_dev->port[i - s].dev.owner = THIS_MODULE;
- kobject_set_name(&umad_dev->port[i - s].dev.kobj,
- "umad%d", umad_dev->port[i - s].devnum);
- if (cdev_add(&umad_dev->port[i - s].dev, base_dev +
- umad_dev->port[i - s].devnum, 1))
+ if (ib_umad_init_port(device, i, &umad_dev->port[i - s]))
goto err;
-
- umad_dev->port[i - s].class_dev.class = &umad_class;
- umad_dev->port[i - s].class_dev.dev = device->dma_device;
- snprintf(umad_dev->port[i - s].class_dev.class_id,
- BUS_ID_SIZE, "umad%d", umad_dev->port[i - s].devnum);
- if (class_device_register(&umad_dev->port[i - s].class_dev))
- goto err_class;
-
- if (class_device_create_file(&umad_dev->port[i - s].class_dev,
- &class_device_attr_dev))
- goto err_class;
- if (class_device_create_file(&umad_dev->port[i - s].class_dev,
- &class_device_attr_ibdev))
- goto err_class;
- if (class_device_create_file(&umad_dev->port[i - s].class_dev,
- &class_device_attr_port))
- goto err_class;
}
ib_set_client_data(device, &umad_client, umad_dev);
return;
-err_class:
- cdev_del(&umad_dev->port[i - s].dev);
- clear_bit(umad_dev->port[i - s].devnum, dev_map);
-
err:
- while (--i >= s)
+ while (--i >= s) {
class_device_unregister(&umad_dev->port[i - s].class_dev);
+ class_device_unregister(&umad_dev->port[i - s].sm_class_dev);
+ }
kref_put(&umad_dev->ref, ib_umad_release_dev);
}
@@ -665,8 +775,10 @@
if (!umad_dev)
return;
- for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i)
+ for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i) {
class_device_unregister(&umad_dev->port[i].class_dev);
+ class_device_unregister(&umad_dev->port[i].sm_class_dev);
+ }
kref_put(&umad_dev->ref, ib_umad_release_dev);
}
@@ -677,7 +789,7 @@
spin_lock_init(&map_lock);
- ret = alloc_chrdev_region(&base_dev, 0, IB_UMAD_MAX_PORTS,
+ ret = alloc_chrdev_region(&base_dev, 0, IB_UMAD_MAX_PORTS * 2,
"infiniband_mad");
if (ret) {
printk(KERN_ERR "user_mad: couldn't get device number\n");
@@ -708,7 +820,7 @@
class_unregister(&umad_class);
out_chrdev:
- unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS);
+ unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2);
out:
return ret;
@@ -718,7 +830,7 @@
{
ib_unregister_client(&umad_client);
class_unregister(&umad_class);
- unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS);
+ unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2);
}
module_init(ib_umad_init);
--- linux-bk.orig/Documentation/infiniband/user_mad.txt 2005-01-23 08:30:27.000000000 -0800
+++ linux-bk/Documentation/infiniband/user_mad.txt 2005-01-23 20:57:46.505616496 -0800
@@ -2,9 +2,10 @@
Device files
- Each port of each InfiniBand device has a "umad" device attached.
- For example, a two-port HCA will have two devices, while a switch
- will have one device (for switch port 0).
+ Each port of each InfiniBand device has a "umad" device and an
+ "issm" device attached. For example, a two-port HCA will have two
+ umad devices and two issm devices, while a switch will have one
+ device of each type (for switch port 0).
Creating MAD agents
@@ -63,19 +64,36 @@
if (ret != sizeof mad)
perror("write");
+Setting IsSM Capability Bit
+
+ To set the IsSM capability bit for a port, simply open the
+ corresponding issm device file. If the IsSM bit is already set,
+ then the open call will block until the bit is cleared (or return
+ immediately with errno set to EAGAIN if the O_NONBLOCK flag is
+ passed to open()). The IsSM bit will be cleared when the issm file
+ is closed. No read, write or other operations can be performed on
+ the issm file.
+
/dev files
To create the appropriate character device files automatically with
udev, a rule like
KERNEL="umad*", NAME="infiniband/%k"
+ KERNEL="issm*", NAME="infiniband/%k"
- can be used. This will create a device node named
+ can be used. This will create device nodes named
/dev/infiniband/umad0
+ /dev/infiniband/issm0
for the first port, and so on. The InfiniBand device and port
- associated with this device can be determined from the files
+ associated with these devices can be determined from the files
/sys/class/infiniband_mad/umad0/ibdev
/sys/class/infiniband_mad/umad0/port
+
+ and
+
+ /sys/class/infiniband_mad/issm0/ibdev
+ /sys/class/infiniband_mad/issm0/port
More information about the general
mailing list