[openib-general] Re: osm log

[Hal Rosenstock]

On Mon, 2005-01-24 at 18:31, Tom Duffy wrote:
> > You can use smpdump from the Linux machine on attribute 0x14 to the LID
> > of the Solaris machine
> > /usr/local/ib/bin/smpdump 3 0x15
> > if Solaris is LID 3
> > Send me the output as there is no pretty decode right now. The output is
> > the raw MAD data.
> > 
> >  /usr/local/ib/bin/smpdump -D 0 0x15
> > 0000 0000 0000 0000 fe80 0000 0000 0000
> > 0002 0001 0050 0a68 0000 0000 0103 0301
> > 1122 0011 4040 0008 0804 f410 0000 0000
> > 0000 2012 1088 0000 0000 0000 0000 0000
> > 
> > PortState starts at bit 260 (byte 32.5) for 4 bits and PortPhysicalState
> > starts at bit 264 (byte 33) for 4 bits.
> > 
> > PortState is 1 (Down) and PortPhysicalState is 2 (Polling) in the above.
> 
> [root at flopteron2 bin]# ./smpdump 3 0x15
> 0000 0000 0000 0000 fe80 0000 0000 0000
> 0003 0001 0000 024c 0000 0000 0700 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0012 0300 0000 0000 0000 0000 0000
> [root at flopteron2 bin]# ./smpdump -D 0 0x15
> 0000 0000 0000 0000 fe80 0000 0000 0000
> 0001 0001 0050 0a6a 0000 0000 0103 0302
> 1452 0011 4040 0008 0804 f410 0000 0000
> 0000 2012 1088 0000 0000 0000 0000 0000

-D 0 is your local HCA which appears to be PortState 4 (Active) (which
should agree with ibstatus/ibstat).

LID 3 is returning PortState 0 and PortPhysicalState 0 which is no state
change, which is only valid on a Set not a Get :-( Is that the Solaris
HCA port ? If so, it looks to me like there is a SMA problem to be fixed
first.

-- Hal