[openib-general] ipoib/mthca broken on ia64?

[Grant Grundler]

Hi,
I wanted to run netpipe and basics aren't working. I haven't
tried the SVN tree in over a month. It could have been broken
for ia64 for a while. Sorry for lagging on that...

I'm running 2.6.11 kernel with TOB svn bits and building
the IB modules "in tree". Just replaced the drivers/infiniband
with the one from SVN.

Both systems are connected to a TS-90 switch (12 port?) which
implements it own SM. Does this need a firmware upgrade maybe?


iowa:/usr/src/linux-2.6# cat /sys/class/infiniband/mthca0/ports/*/state
1: DOWN
2: INIT
iowa:/usr/src/linux-2.6# cat /sys/class/infiniband/mthca0/hw_rev 
a1
iowa:/usr/src/linux-2.6# cat /sys/class/infiniband/mthca0/fw_ver 
3.3.2


ionize:~# cat /sys/class/infiniband/mthca0/ports/*/state
1: DOWN
2: INIT
ionize:~# cat /sys/class/infiniband/mthca0/hw_rev 
a1
ionize:~# cat /sys/class/infiniband/mthca0/fw_ver
3.3.2


Modprobe output from ionize:
ionize:~# modprobe ib_mthca
ib_mthca: Mellanox InfiniBand HCA driver v0.06-pre (November 8, 2004)
ib_mthca: Initializing Mellanox Technology MT23108 InfiniHost (0000:61:00.0)
GSI 49 (level, low) -> CPU 0 (0x0000) vector 71
ACPI: PCI interrupt 0000:61:00.0[A] -> GSI 49 (level, low) -> IRQ 71
ionize:~#

[ Probably want to roll the driver version and date again.]

Any clues where I should be looking next?

thanks,
grant