[openib-general] ipoib/mthca broken on ia64?

Grant Grundler iod00d at hp.com
Wed Mar 23 12:31:38 PST 2005


On Wed, Mar 23, 2005 at 12:16:08PM -0800, Roland Dreier wrote:
> It looks like the driver is working but the SM isn't bringing the
> ports to the active state.  The problem could still be on the host or
> the switch unfortunately.  What do you see in the files
> 
>     /sys/class/infiniband/mthca0/ports/2/counters/port_rcv_packets
>     /sys/class/infiniband/mthca0/ports/2/counters/port_xmit_packets

ionize:~# cat /sys/class/infiniband/mthca0/ports/*/counters/port_rcv_packets
0
0
ionize:~# cat /sys/class/infiniband/mthca0/ports/*/counters/port_xmit_packets
0
0

Ditto for iowa.

>     > Both systems are connected to a TS-90 switch (12 port?) which
>     > implements it own SM. Does this need a firmware upgrade maybe?
> 
> It's entirely possible.  Have you used the same switch successfully in
> the past?

Yes. This is the only switch I've got.

> You can check that the switch's SM is still working by
> connecting a cable directly from one switch port to another.  You
> should see both LEDs come on for both ports (possibly after a couple
> second delay) if the SM is still running.

I'm still at home and will test that after lunch when I head down
to the computer room (Cupertino).

> I believe the switch ports will get to INIT even with the embedded CPU
> completely hosed, so it's possible your switch has crashed or failed completely.

*nod*. I try the above first...then cycle power and see if it
comes back to life. The switch has been on since December or so.

thanks,
grant



More information about the general mailing list