[openib-general] SRP device management client (and a few opensmglitches)

[Eitan Zahavi]

You should not get more then one SA header. 
I assumed you are doing GetTable of PortInfoRecord. If this is correct
you should only get one SA header in the resulting RMPP (reassembled
MAD).

EZ

Eitan Zahavi
Design Technology Director
Mellanox Technologies LTD
Tel:+972-4-9097208
Fax:+972-4-9593245
P.O. Box 586 Yokneam 20692 ISRAEL


> -----Original Message-----
> From: Roland Dreier [mailto:rolandd at cisco.com]
> Sent: Tuesday, November 15, 2005 5:31 PM
> To: Hal Rosenstock
> Cc: Eitan Zahavi; Roland Dreier; openib-general at openib.org
> Subject: Re: [openib-general] SRP device management client (and a few
> opensmglitches)
> 
>     Hal> Are those the only component fields which were zeroed out ?
> 
> No, for example the capability mask is all 0 as well.
> 
> It seems to be something a little bit more complicated.  In my test
> fabric, which has a single 24-port switch with hosts connected to
> both port 1 and port 2 (of the switch), I see no extra entries for my
> port 1 query.  For my port 2 query, I get exactly 24 entries with a
> base_lid of zero and a local port number of 2.  The PortNum in the SA
> header goes from 1 through 24.
> 
>  - R.