[openib-general] Re: private data...

[Jimmy Hill]

A Linux uDAPL-based system infrastructure application I am working on at 
IBM currently depends on 64-bytes of Private Data for Connect and Accept 
as well.

-- jimmy




Oracle currently depends on 64 bytes of private data for connect and 
accept. 
 

----- Original Message ----- 
From: Kanevsky, Arkady 
To: Davis, Arlin R ; dat-discussions at yahoogroups.com ; Grant Grundler 
Cc: swg at infinibandta.org ; openib-general at openib.org 
Sent: Wednesday, October 19, 2005 11:31 AM
Subject: RE: [dat-discussions] RE: [openib-general] Re: iWARP 
emulationprotocol

Arlin,
just to clarify, Intel MPI will not have problems with useing less than 64 
bytes
of private data.
If a solution will provide you with 48 bytes of private data will it be 
sufficient?
Arkady
 
 
Arkady Kanevsky                       email: arkady at netapp.com
Network Appliance                     phone: 781-768-5395
375 Totten Pond Rd.                  Fax: 781-895-1195
Waltham, MA 02451-2010          central phone: 781-768-5300
 
-----Original Message-----
From: Davis, Arlin R [mailto:arlin.r.davis at intel.com] 
Sent: Wednesday, October 19, 2005 11:30 AM
To: dat-discussions at yahoogroups.com; Grant Grundler
Cc: swg at infinibandta.org; openib-general at openib.org
Subject: RE: [dat-discussions] RE: [openib-general] Re: iWARP 
emulationprotocol

Arkady,
 
Intel MPI (real consumer of uDAPL) has no problem with this change.
 
-arlin
 

From: dat-discussions at yahoogroups.com 
[mailto:dat-discussions at yahoogroups.com] On Behalf Of Kanevsky, Arkady
Sent: Wednesday, October 19, 2005 6:40 AM
To: Grant Grundler; Caitlin Bestler
Cc: Roland Dreier; swg at infinibandta.org; dat-discussions at yahoogroups.com; 
openib-general at openib.org
Subject: [dat-discussions] RE: [openib-general] Re: iWARP emulation 
protocol
 
Grant,
The developers of the application(s) in questions are aware of the
discussion.
I will leave it to them to respond.

I bring the discussion point at the weekly DAT Collaborative meeting
which we have every Wednesday.

I appologize that the DAT Collaborative charter does not allow
to submit contribution without joining DAT Collaborative.
But this is no different from Linux not accepting any contrubutions
without proper license.
Byt be rest assure that as a Chair I bring the concerns
and suggestions stated in email discussion at the DAT meetings.

Arkady

Arkady Kanevsky                       email: arkady at netapp.com
Network Appliance                     phone: 781-768-5395
375 Totten Pond Rd.                  Fax: 781-895-1195
Waltham, MA 02451-2010          central phone: 781-768-5300



> -----Original Message-----
> From: Grant Grundler [mailto:iod00d at hp.com] 
> Sent: Tuesday, October 18, 2005 8:02 PM
> To: Caitlin Bestler
> Cc: Grant Grundler; Roland Dreier; Kanevsky, Arkady; 
> swg at infinibandta.org; dat-discussions at yahoogroups.com; 
> openib-general at openib.org
> Subject: Re: [openib-general] Re: iWARP emulation protocol
> 
> 
> On Tue, Oct 18, 2005 at 04:40:54PM -0700, Caitlin Bestler wrote:
> > > Roland (and the rest of us) would like to see someone name a
> > > real consumer of the proposed interface. ie who depends on 
> > > this change?
> > > Then the dependency for that use/user can be discussed and 
> > > appropriate tradeoffs made. Make sense?
> > 
> > Unfortunately not every application that is under 
> development, or even 
> > deployed, can be discussed in a google-searchable public 
> forum. That 
> > especially applies to user-mode development.
> 
> Well, this is open source. While I don't want to preclude 
> closed source developement, it's usually necessary to have an 
> open source consumer that any open source developer can test with.
> 
> > So I could have actually tested such applications and still not be 
> > free to cite them here.
> 
> Understood. I'm not asking *you* to cite one unless you
> happen to own one of the consumers. 
> 
> > With any luck some of them
> > are following the discussion and will jump in on their own. 
> > Unfortunately, since they are developing to uDAPL they are 
> unlikely to 
> > be following this discussion.
> 
> It doesn't help that the DAT yahoo-groups.com mailing list is 
> rejecting my replies.  It would be helpful if someone 
> following this forum could share Roland's question with DAT 
> mailing list if it didn't make it there already and possibly 
> explain why naming a consumer is necessary.
> 
> hth,
> grant
> 



SPONSORED LINKS 
Protocol 
Communication and networking 
Wireless communication and networking 

YAHOO! GROUPS LINKS 

 Visit your group "dat-discussions" on the web.
  
 To unsubscribe from this group, send an email to:
 dat-discussions-unsubscribe at yahoogroups.com
  
 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20051020/b8b90b41/attachment.html>