[openib-general] configuring ipoib

[Hal Rosenstock]

On Fri, 2005-10-21 at 11:02, Kanevsky, Arkady wrote:
> How do you configure ipoib?
> I used "ifconfig  ib0 ip_address" which works fine.
> But if I have several ports on an HCA how do I specify which port
> ip_address should be associated with?
> Ditto if you have multiple cards.

HCA port 0 = ib0
HCA port 1 = ib1

I think additional HCAs would be: ib2/ib3, etc.

-- Hal

> Thanks,
>  
> 
> Arkady Kanevsky                       email: arkady at netapp.com
> 
> Network Appliance                     phone: 781-768-5395
> 
> 375 Totten Pond Rd.                  Fax: 781-895-1195
> 
> Waltham, MA 02451-2010          central phone: 781-768-5300
> 
>  
> 
> 
>  
> 
> ______________________________________________________________________
> 
> _______________________________________________
> openib-general mailing list
> openib-general at openib.org
> http://openib.org/mailman/listinfo/openib-general
> 
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general