[openib-general] RE: osmtest osmt_multicast.c physible

[Liran Sorani]

Hi ,
The o15-0.2.2 is dealing with MC group creation its required components .
The section you've pointed at the osmtest does MC creation by variant MTU &
RATE values.
A physible MTU / RATE means valid subnet MTU/RATE values for the port
Osmtest running on. These values are responsed by OpenSM as the correct
values this port can use.


-----Original Message-----
From: Yael Kalka 
Sent: Tuesday, September 13, 2005 8:21 AM
To: 'Hal Rosenstock'; Yael Kalka; Liran Sorani
Cc: openib-general at openib.org
Subject: RE: osmtest osmt_multicast.c physible


Liran,
As owner of the osmtest - please answer the below.
Yael

-----Original Message-----
From: Hal Rosenstock [mailto:halr at voltaire.com]
Sent: Monday, September 12, 2005 3:36 PM
To: Yael Kalka
Cc: openib-general at openib.org
Subject: osmtest osmt_multicast.c physible


Hi Yael,

What is meant by physible in the below ?

osmtest/osmt_multicast.c:           "Fifth exact MTU & RATE physible, Sixth
exact RATE physible\n\t\t"
osmtest/osmt_multicast.c:           "Seventh exact MTU physible
(o15.0.1.4)...\n"
osmtest/osmt_multicast.c:   /* Using Exact physible MTU & RATE */
osmtest/osmt_multicast.c:   /* Using Exact physible RATE */
osmtest/osmt_multicast.c:   /* Using Exact physible MTU */

Also, o15.0.1.4 is obsolete at 1.2 and is replaced by o15-0.2.2..

Thanks.

-- Hal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20050913/c6ff55ff/attachment.html>