[openib-general] RE: osmtest osmt_multicast.c physible

Liran Sorani liran at mellanox.co.il
Tue Sep 13 11:30:25 PDT 2005


-----Original Message-----
From: Hal Rosenstock [mailto:halr at voltaire.com]
Sent: Tuesday, September 13, 2005 1:39 PM
To: Liran Sorani
Cc: Yael Kalka; 'openib-general at openib.org'
Subject: RE: osmtest osmt_multicast.c physible


> On Tue, 2005-09-13 at 03:30, Liran Sorani wrote:
> > The o15-0.2.2 is dealing with MC group creation its required
> > components . 

> as was the old o15.0.1.4 from 1.1 which the comment in the code was
> referring to. Shouldn't it be updated to 1.2 ?

Yes it is updated but in our local repository . 
The Mellanox test package will be uploaded to openib in the near future .

> > The section you've pointed at the osmtest does MC creation by variant
> > MTU & RATE values.

> Right.

> > A physible MTU / RATE means valid subnet MTU/RATE values for the port
> > Osmtest running on. These values are responsed by OpenSM as the
> > correct values this port can use.

> I understand now: Feasible rather than physible.
Sorry for the misleading name.
> -- Hal

> > -----Original Message-----
> > From: Yael Kalka 
> > Sent: Tuesday, September 13, 2005 8:21 AM
> > To: 'Hal Rosenstock'; Yael Kalka; Liran Sorani
> > Cc: openib-general at openib.org
> > Subject: RE: osmtest osmt_multicast.c physible
> > 
> > 
> > Liran,
> > As owner of the osmtest - please answer the below.
> > Yael
> > 
> > -----Original Message-----
> > From: Hal Rosenstock [mailto:halr at voltaire.com]
> > Sent: Monday, September 12, 2005 3:36 PM
> > To: Yael Kalka
> > Cc: openib-general at openib.org
> > Subject: osmtest osmt_multicast.c physible
> > 
> > 
> > Hi Yael,
> > 
> > What is meant by physible in the below ?
> > 
> > osmtest/osmt_multicast.c:           "Fifth exact MTU & RATE physible,
> > Sixth exact RATE physible\n\t\t"
> > osmtest/osmt_multicast.c:           "Seventh exact MTU physible
> > (o15.0.1.4)...\n"
> > osmtest/osmt_multicast.c:   /* Using Exact physible MTU & RATE */
> > osmtest/osmt_multicast.c:   /* Using Exact physible RATE */
> > osmtest/osmt_multicast.c:   /* Using Exact physible MTU */
> > 
> > Also, o15.0.1.4 is obsolete at 1.2 and is replaced by o15-0.2.2..
> > 
> > Thanks.
> > 
> > -- Hal
> > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20050913/4788505b/attachment.html>


More information about the general mailing list