[openib-general] could not add HCA InfiniHost0

[Grant Grundler]

On Sun, Sep 18, 2005 at 11:49:06PM +0800, QiWang, Chen wrote:
> 03:00.0 InfiniBand: Mellanox Technologies MT23108 InfiniHost (rev a1)
>         Subsystem: Mellanox Technologies MT23108 InfiniHost
...
>         Interrupt: pin A routed to IRQ 193

vs.

> 03:00.0 InfiniBand: Mellanox Technologies MT23108 InfiniHost (rev a1)
>         Subsystem: Mellanox Technologies MT23108 InfiniHost
...
>         Interrupt: pin A routed to IRQ 201

suggests the two blades are not identical HW.

The MMIO BAR config and routing looked fine.

Doesn't BIOS normally assign the PCI_INTERRUPT_LINE values to PCI devices?

hth,
grant