[openib-general] IPoIB configuration

[Woodruff, Robert J]

Hal wrote, 
>> > Also, what is your HCA firmware version ?
>> 
>> $ cat /sys/class/infiniband/mthca0/fw_ver
>> 3.3.3

>That's the most recent.

>-- Hal

I would try 2 nodes point to point. If that works, then
I suspect the switch. I did see an issue with one of our MT2400 switches
with IPoIB connectivity. We replaced the switch and it
seemed to fix the problem, so we did not investigate further,
but perhaps down rev. F/W could have been the problem.

woody