[openib-general] IPoIB configuration

[Thomas Moschny]

On Thursday 29 September 2005 23:44, Woodruff, Robert J wrote:
> I would try 2 nodes point to point. If that works, then
> I suspect the switch. I did see an issue with one of our MT2400 switches
> with IPoIB connectivity. We replaced the switch and it
> seemed to fix the problem, so we did not investigate further,
> but perhaps down rev. F/W could have been the problem.

Just for the record: 
Meanwhile, I updated the MTS2400 switch firmware from 0.0.1 to 0.7.0. Now I 
see IPoIB connectivity, albeit using the Mellanox Gold Distribution driver, 
but I expect the OpenIB drivers to work now, too (will try that).

Thanks for your comments.

Regards,
Thomas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20050930/aedf71a2/attachment.sig>