[openib-general] Segmentation fault on ib_read_bw
Adit Ranadive
adit.262 at gmail.com
Fri Dec 1 07:35:38 PST 2006
I managed to get the test working .. I just restarted the server and
it was working..
Im actually doing some work with the Xen VMM and Infiniband..
I have setup 2 servers (Pentium D - x86_64 arch) with red hat
enterprise linux 4 and Xen 3 VMM running .. The IB driver seems to be
working on dom0 in any case and I can do all of the perf tests.
I wanted to know if there was any correlation between the QoS setup
done using openSM and the perf tests i.e. if I configure QoS in
opensm.opts should I be seeing marked differences in the BW from the
perf tests?
Is there any kind of documentation that gives an idea how the BW can
change for diff QoS params?
Regards,
Adit
On 12/1/06, dotanb at dev.mellanox.co.il <dotanb at dev.mellanox.co.il> wrote:
> Hi.
>
> > Hi,
> >
> > Im using the openib gen2 trunk and was running the performance tests
> > from that tree.
> > I get a "Segmentation Fault" on running ib_read_bw and the remaining
> > tests.
> > The output is as follows:
> > ------------------------------------------------------------------
> > RDMA_Read BW Test
> > Connection type : RC
> > Segmentation fault
> >
> > Any particular reason why this is happening?
>
> Can you give some more info, such as:
>
> which driver git/svn version are you using?
> which parameters did you use in each side?
> which distro are you using?
> which computer arch are you using?
>
> thanks
> Dotan
>
>
--
Adit Ranadive
Freshman,
Georgia Institute of Technology,
Atlanta, GA
More information about the general
mailing list