[openib-general] [mstflint] firmware upgrade error

[Benoit Morin]

Hi,

I tried upgrading the firmware on a MHX-CE128-T card (firmware 3.2.0) 
using the firmware fw-23108-3_3_5-MHX-CE128-T.bin found on Mellanox's 
website. I used mstflint found in revision 4464 of the openib svn. I 
used the -nofs flag following what I read in the "[mstflint] firmware 
upgrade instructions" thread.

Now, after a reboot, I get the following :

ib_mthca: Mellanox InfiniBand HCA driver v0.06 (June 23, 2005)
ib_mthca: Initializing 0000:02:00.0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 28 (level, low) -> IRQ 19
ib_mthca 0000:02:00.0: SYS_EN DDR error: syn=0, sock=0, sladdr=0, SPD 
source=DIMM
ib_mthca 0000:02:00.0: SYS_EN returned status 0x07, aborting.
ACPI: PCI interrupt for device 0000:02:00.0 disabled
ib_mthca: probe of 0000:02:00.0 failed with error -22

I no longer have access to anything under /sys/class/infiniband. Is the 
card toast? Where did I go wrong?

Thanks all,

Benoit Morin