[openib-general] OpenSM doesn't start on p5 570

[Hal Rosenstock]

On Mon, 2006-01-16 at 06:56, Andrey Slepuhin wrote:
> On Mon, Jan 16, 2006 at 06:31:46AM -0500, Hal Rosenstock wrote:
> > Hi,
> > 
> > On Mon, 2006-01-16 at 05:48, Andrey Slepuhin wrote:
> > > Dear folks,
> > > 
> > > I have a problem starting opensm on a p5 570 machine.
> > 
> > Is this the first time trying this on a p5 machine ?
> > 
> 
> Yes.
> 
> 
> > > Jan 16 13:30:55 737939 [43027B20] -> umad_receiver: ERR 5413: Failed to obtain request madw for received MAD(method=0x81
> > > attr=0x11) -- dropping
> > 
> > This means that no matching transaction was found in transaction match
> > table. This may be an endian problem with the tid.
> > 
> > Can you validate the tid (print them out) in both get_madw and put_madw
> > in osm_vendor_ibumad.c ? Since this seems to happen early on, there
> > shouldn't be too many of these. Thanks.
> 
> I got the following:
> 
> put_madw: tid=0x1234
> get_madw: tid=0x1b00001234

This looks like an endian issue. I will have a patch for you to try
later. Stay tuned. Thanks.

> > 
> > Are the two HCAs on separate machines ?
> 
> No, at the moment they are on the same machine.

You should be able to run this in loopback. I have done this. Just
wondering about the topology just to be sure...

-- Hal

> Best regards,
> Andrey