[openib-general] ehca issues, again
Troy Benjegerdes
troy at scl.ameslab.gov
Wed Jul 12 09:40:23 PDT 2006
This is the latest svn ehca code, 2.6.17 kernel.
Can I also request that the EHCA driver print out what PHYP firmware it
is known to work with, just like mthca prints out a warning if the
mellanox card firmware is out of date? And while I'm asking about PHYP,
what version are the ehca developer running?
p5l6:~# modprobe hcad_mod nr_ports=1
eHCA Infiniband Device Driver (Rel.: SVNEHCA_0009)
xics_enable_irq: irq=36868: ibm_int_on returned -3
p5l6:~#
p5l6:~# ibv_devinfo
libibverbs: Fatal: couldn't read uverbs ABI version.
No IB devices found
p5l6:~# modprobe ib_uverbs
p5l6:~# ibv_devinfo
hca_id: ehca0
node_guid: 0002:5500:0003:5a00
sys_image_guid: 0000:0000:0000:0000
vendor_id: 0x5076
vendor_part_id: 0
hw_ver: 0x1000002
phys_port_cnt: 1
port: 1
state: PORT_DOWN (1)
max_mtu: 2048 (4)
active_mtu: 2048 (4)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
p5l6:~# ibv_rc_pingpong
PU0003 000e0091:ehca_hcall_7arg_7ret HCAD_ERROR opcode=168
ret=ffffffffffffffd3 arg1=1000000003000004 arg2=2000000000000006
arg3=ac0000000000000 arg4=e7a9b000 arg5=0 arg6=0 arg7=0 out1=0 out2=0
out3=0 out4=0 out5=0 out6=80000000000dad58 out7=0
PU0003 000b04c9:internal_modify_qp HCAD_ERROR hipz_h_modify_qp() failed
rc=ffffffffffffffd3 ehca_qp=c0000000e3626c80 qp_num=6
Failed to modify QP to INIT
p5l6:~# modprobe ib_umad
PU0007 000b0073:ehca_define_sqp HCAD_ERROR Port 1 is not active.
PU0007 000b0258:ehca_create_qp HCAD_ERROR ehca_define_sqp() failed
rc=ffffffffffffffff
PU0007 000b02c0:ehca_create_qp <<< failed ret=ffffffea
ib_mad: Couldn't create ib_mad QP1
ib_mad: Couldn't open ehca0 port 1
More information about the general
mailing list