[openib-general] OFED-1.0-rc6 is available

[Roland Dreier]

Thanks... one further fix for Cisco gateways: sometimes the IsDM bit
is set on switch ports as well, so ibsrpdm should not be limited to
just CA ports.

Here's the patch, also on the trunk as r7836.

--- srptools/ChangeLog	(revision 7803)
+++ srptools/ChangeLog	(working copy)
@@ -1,3 +1,10 @@
+2006-06-08  Roland Dreier  <rdreier at cisco.com>
+
+	* src/srp-dm.c (get_port_list): In some setups (eg Cisco SFS 3001
+	with an FC gateway), there will be switches with the IsDM bit set
+	on port 0.  So the initial get of NodeRecords must retrieve all
+	records, not just CA ports.
+
 2006-06-07  Roland Dreier  <rdreier at cisco.com>
 	* src/srp-dm.c (do_port): Use correct endianness when comparing
 	GUID against Topspin OUI.
--- srptools/src/srp-dm.c	(revision 7803)
+++ srptools/src/srp-dm.c	(working copy)
@@ -523,11 +523,9 @@ static int get_port_list(int fd, uint32_
 	out_sa_mad->mgmt_class 	  = SRP_MGMT_CLASS_SA;
 	out_sa_mad->method     	  = SRP_SA_METHOD_GET_TABLE;
 	out_sa_mad->class_version = 2;
-	out_sa_mad->comp_mask     = htonll(1ul << 4); /* node type */
+	out_sa_mad->comp_mask     = 0; /* Get all end ports */
 	out_sa_mad->rmpp_version  = 1;
 	out_sa_mad->rmpp_type     = 1;
-	node                      = (void *) out_sa_mad->data;
-	node->type		  = 1; /* CA */
 
 	len = send_and_get(fd, &out_mad, in_mad, node_table_response_size);
 	if (len < 0)