[openib-general] [PATCH] mthca - query qp
Eli Cohen
eli at mellanox.co.il
Mon Mar 13 23:01:37 PST 2006
Hi Roland,
What about this patch? Are you going to apply it?
-----Original Message-----
From: openib-general-bounces at openib.org
[mailto:openib-general-bounces at openib.org] On Behalf Of Eli Cohen
Sent: Wednesday, March 08, 2006 4:32 PM
To: Roland Dreier
Cc: openib-general at openib.org
Subject: [openib-general] [PATCH] mthca - query qp
1. Fix error flow - if status is not zero exit with error
2. Few more values extracted
Signed-off-by: Eli Cohen <eli at mellanox.co.il>
Index: last_stable/drivers/infiniband/hw/mthca/mthca_qp.c
===================================================================
--- last_stable.orig/drivers/infiniband/hw/mthca/mthca_qp.c
+++ last_stable/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -427,6 +427,12 @@ int mthca_query_qp(struct ib_qp *ibqp, s
if (err)
goto out;
+ if (status) {
+ mthca_warn(dev, "QUERY_QP returned status %02x\n",
status);
+ err = -EINVAL;
+ goto out;
+ }
+
qp_param = mailbox->buf;
context = &qp_param->context;
mthca_state = be32_to_cpu(context->flags) >> 28;
@@ -454,6 +460,9 @@ int mthca_query_qp(struct ib_qp *ibqp, s
qp_attr->pkey_index =
be32_to_cpu(context->pri_path.port_pkey) & 0x7f;
qp_attr->alt_pkey_index =
be32_to_cpu(context->alt_path.port_pkey) & 0x7f;
+ qp_attr->timeout = context->pri_path.ackto >> 3;
+ qp_attr->alt_timeout = context->alt_path.ackto >> 3;
+
/* qp_attr->en_sqd_async_notify is only applicable in modify qp
*/
qp_attr->sq_draining = mthca_state == MTHCA_QP_STATE_DRAINING;
@@ -469,7 +478,17 @@ int mthca_query_qp(struct ib_qp *ibqp, s
qp_attr->rnr_retry = context->pri_path.rnr_retry >> 5;
qp_attr->alt_port_num = qp_attr->alt_ah_attr.port_num;
qp_attr->alt_timeout = context->alt_path.ackto >> 3;
+
+ qp_init_attr->event_handler = ibqp->event_handler;
+ qp_init_attr->qp_context = ibqp->qp_context;
+ qp_init_attr->send_cq = ibqp->send_cq;
+ qp_init_attr->recv_cq = ibqp->recv_cq;
+ qp_init_attr->srq = ibqp->srq;
qp_init_attr->cap = qp_attr->cap;
+ qp_init_attr->sq_sig_type = ((be32_to_cpu(context->params1) >>
3) & 0x1) ?
+ IB_SIGNAL_REQ_WR : IB_SIGNAL_ALL_WR;
+ qp_init_attr->qp_type = ibqp->qp_type;
+ qp_init_attr->port_num = qp_attr->ah_attr.port_num;
out:
mthca_free_mailbox(dev, mailbox);
_______________________________________________
openib-general mailing list
openib-general at openib.org
http://openib.org/mailman/listinfo/openib-general
To unsubscribe, please visit
http://openib.org/mailman/listinfo/openib-general
More information about the general
mailing list