[openib-general] Re: NOP problem in ib_mthca on OFED RC4

[Don.Albert at Bull.com]

Michael,

> > > Which FW revision do you have?
> > >
> > The "ibstat" command shows:
> > 
> >         CA type: MT25204
> >         Number of ports: 1
> >         Firmware version: 1.0.800
> >         Hardware version: a0
> >         Node GUID: 0x0002c90200216dc4
> >         System image GUID: 0x0002c90200216dc7
> > 
> >   -Don Albert-
> > 
> 
> Yes, that's the latest revision. Hmm.
> 

What about the other thing I mentioned in my first message:  the "lspci" 
command complains about the board slot that the HCA is plugged into:

   pcilib: Resource 2 in /sys/bus/pci/devices/0000:03:00.0/resource has a 
64-bit address, ignoring
   ....
   03:00.0 InfiniBand: Mellanox Technologies MT25204 [InfiniHost III Lx 
HCA] (rev 20)

I also found out that on this machine the HCA is plugged into a 16X PCI-e 
slot, which is different than the other machine which is working, where 
the slot is 8X.

Bear in mind, however, that both machines were previously working with the 
2.6.9-34 kernel with the backport patches and the OpenIB svn 6500 code. 
Did something happen in 2.6.16, or am I missing a patch?

        -Don Albert-
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20060509/831fcb65/attachment.html>