[openib-general] [PATCH 6/6] iSER Kconfig and Makefile

[Roland Dreier]

I fixed up this patch so that it actually hooks into the build (as
below).  (BTW, when sending patches in the future, please make them
apply with "-p1" -- your patches had paths like

    /usr/src/linux-2.6.17-rc3/drivers/infiniband/ulp/iser-x/Kconfig 

so I had to manually strip off the /usr/src/)

Anyway, with a config like

    CONFIG_SCSI_ISCSI_ATTRS=y
    # CONFIG_ISCSI_TCP is not set
    CONFIG_INFINIBAND_ISER=y

My build fails with a bunch of errors like:

    drivers/built-in.o: In function `iser_comp_error_worker':iser_verbs.c:(.text+0x7d7cd): undefined reference to `iscsi_conn_failure'

and so on.  Is the correct fix for this to add

obj-$(CONFIG_INFINIBAND_ISER) 	+= libiscsi.o

to drivers/scsi/Makefile?

Also, I get the following sparse warning:

    drivers/infiniband/ulp/iser/iser_initiator.c:610:25: error: incompatible types for operation (&)

and the code there does look fishy:

	itt = hdr->itt & ISCSI_ITT_MASK; /* mask out cid and age bits */

hdr->itt is __be32 but ISCSI_ITT_MASK is just (0xfff), so it seems
that there is something wrong, either with the iSCSI endianness
annotation or with the code itself.

Thanks,
  Roland

---

diff-tree 9120bc6c8b5bdd1f4c85df7a04779ae8faa0c1a5 (from 4161cba09429dae06d249584ee1c7d63c672422c)
Author: Or Gerlitz <ogerlitz at voltaire.com>
Date:   Thu May 11 10:03:30 2006 +0300

    IB/iser: iSER Kconfig and Makefile
    
    Kconfig and Makefile for iSER.
    
    Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com>
    Signed-off-by: Roland Dreier <rolandd at cisco.com>

diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index ba2d650..69a53d4 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -41,4 +41,6 @@ source "drivers/infiniband/ulp/ipoib/Kco
 
 source "drivers/infiniband/ulp/srp/Kconfig"
 
+source "drivers/infiniband/ulp/iser/Kconfig"
+
 endmenu
diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile
index eea2732..abeaf79 100644
--- a/drivers/infiniband/Makefile
+++ b/drivers/infiniband/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_INFINIBAND_MTHCA)		+= hw/mt
 obj-$(CONFIG_IPATH_CORE)		+= hw/ipath/
 obj-$(CONFIG_INFINIBAND_IPOIB)		+= ulp/ipoib/
 obj-$(CONFIG_INFINIBAND_SRP)		+= ulp/srp/
+obj-$(CONFIG_INFINIBAND_SRP)		+= ulp/iser/
diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
new file mode 100644
index 0000000..fead87d
--- /dev/null
+++ b/drivers/infiniband/ulp/iser/Kconfig
@@ -0,0 +1,11 @@
+config INFINIBAND_ISER
+	tristate "ISCSI RDMA Protocol"
+	depends on INFINIBAND && SCSI
+	select SCSI_ISCSI_ATTRS
+	---help---
+	  Support for the ISCSI RDMA Protocol over InfiniBand.  This
+	  allows you to access storage devices that speak ISER/ISCSI
+	  over InfiniBand.
+
+	  The ISER protocol is defined by IETF.
+	  See <http://www.ietf.org/>.
diff --git a/drivers/infiniband/ulp/iser/Makefile b/drivers/infiniband/ulp/iser/Makefile
new file mode 100644
index 0000000..fe6cd15
--- /dev/null
+++ b/drivers/infiniband/ulp/iser/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_INFINIBAND_ISER)	+= ib_iser.o
+
+ib_iser-y			:= iser_verbs.o iser_initiator.o iser_memory.o \
+				   iscsi_iser.o