[openib-general] Ordering between PCI config space writes and MMIO reads?

David Miller davem at davemloft.net
Wed Nov 1 15:04:18 PST 2006


From: John Partridge <johnip at sgi.com>
Date: Wed, 01 Nov 2006 10:27:19 -0600

> Sorry, but I find this change a bit puzzling. The problem is
> particular to the PPB on the HCA and not Altix. I can't see anywhere
> that a PCI Config Write is required to block until completion, it is
> the driver and the HCA ,not the Altix hardware that requires the
> Config Write to have completed before we leave mthca_reset()
> Changing pci_write_config_xxx() will change the behavior for ALL
> drivers and the possibility of breaking something else. The fix was
> very low risk in mthca_reset(), changing the PCI code to fix this is
> much more onerous.

The issue is that something as simple as:

	val = pci_read_config(REG);
	val |= bit;
	pci_write_config(REG, val);
	newval = pci_read_config(REG);
	BUG_ON(!(newval & bit));

is not guarenteed by PCI (aparently).

I see no valid reason why every PCI device driver should
be troubled with this lunacy and the ordering should thus
be ensured by the PCI layer.

It just so happens to take care of the original driver
issue too :-)




More information about the general mailing list