[openib-general] Error starting IB HCA while Linux Boot

[Adit Ranadive]

This is the first one i tried.. During a couple of the boot up
processes it did give an error sayin you amy need to replace your RAM
modules..
Is it possible that due to bad RAM chips the device could fail to startup?

Thanks,
Adit

On 11/6/06, Roland Dreier <rdreier at cisco.com> wrote:
>  > ib_mthca 0000:02:00.0: SYS_EN DDR error: syn=4, sock=0, sladdr=0, SPD source=DIMM
>
> The HCA is reporting a memory calibration error.  Most likely this is
> a physical hardware problem somewhere in your system.
>
> Is it just one system failing like this, or do you have multiple
> HCAs/systems with the same error message?
>
>  - R.
>


--
Adit Ranadive
Freshman,
Georgia Institute of Technology,
Atlanta, GA


-- 
Adit Ranadive
Freshman,
Georgia Institute of Technology,
Atlanta, GA