[openib-general] uDAPL - using both ports of HCA

[Bill Hartner]

I have both ports of the HCA connected to a Voltaire switch for both client
and server.  I have no luck trying to use the 2nd port with uDAPL.  Is it
possible to use the 2nd port ?

I get this on the server when trying to accept the connection;

dapl_cr_accept (0x350f610, 0x350f7e0, 0, (nil))
 accept(cr 0x350f610 conn 0x350f4b0, id 0x350f350, p_data (nil), p_sz=0)
 accept: ERR dev(0x350c270!=0x350c270) or port mismatch(2!=1)
 destroy_conn: conn 0x350f4b0 id 55636816
dat_cr_accept[262144] failed 0
derr 40000 DAT_INTERNAL_ERROR
DAPL: Stopped (dapl_fini)

-Bill