[openib-general] [PATCH v2 11/11] Kconfig/Makefile. Modifications to toplevel Kconfig/Makefile

[Ramachandra K]

Adds the Kconfig and Makefile for the driver.
Modifies the top level Infiniband Kconfig and Makefile to include VNIC.

Signed-off-by: Ramachandra K <ramachandra.kuchimanchi at qlogic.com>
---

 drivers/infiniband/Kconfig           |    2 ++
 drivers/infiniband/Makefile          |    1 +
 drivers/infiniband/ulp/vnic/Kconfig  |   28 ++++++++++++++++++++++++++++
 drivers/infiniband/ulp/vnic/Makefile |   12 ++++++++++++
 4 files changed, 43 insertions(+), 0 deletions(-)

diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 9edface..5676c6a 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -45,4 +45,6 @@ source "drivers/infiniband/ulp/srp/Kconf
 
 source "drivers/infiniband/ulp/iser/Kconfig"
 
+source "drivers/infiniband/ulp/vnic/Kconfig"
+
 endmenu
diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile
index 2b5d109..5407878 100644
--- a/drivers/infiniband/Makefile
+++ b/drivers/infiniband/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_INFINIBAND_AMSO1100)	+= hw/
 obj-$(CONFIG_INFINIBAND_IPOIB)		+= ulp/ipoib/
 obj-$(CONFIG_INFINIBAND_SRP)		+= ulp/srp/
 obj-$(CONFIG_INFINIBAND_ISER)		+= ulp/iser/
+obj-$(CONFIG_INFINIBAND_VNIC)		+= ulp/vnic/
diff --git a/drivers/infiniband/ulp/vnic/Kconfig b/drivers/infiniband/ulp/vnic/Kconfig
new file mode 100644
index 0000000..39f88a3
--- /dev/null
+++ b/drivers/infiniband/ulp/vnic/Kconfig
@@ -0,0 +1,28 @@
+config INFINIBAND_VNIC
+	tristate "VNIC - Support for QLogic Virtual Ethernet I/O Controller"
+	depends on INFINIBAND && NETDEVICES && INET
+	---help---
+	  Support for the QLogic Virtual Ethernet I/O Controller
+	  (VEx). In conjunction with the VEx, this provides virtual
+	  ethernet interfaces and transports ethernet packets over
+	  InfiniBand so that you can communicate with Ethernet networks
+	  using your IB device.
+
+config INFINIBAND_VNIC_DEBUG
+	bool "VNIC Verbose debugging"
+	depends on INFINIBAND_VNIC
+	default n
+	---help---
+	  This option causes verbose debugging code to be compiled
+	  into the VNIC driver.  The output can be turned on via the
+	  vnic_debug module parameter.
+
+config INFINIBAND_VNIC_STATS
+	bool "VNIC Statistics"
+	depends on INFINIBAND_VNIC
+	default n
+	---help---
+	  This option compiles statistics collecting code into the
+	  data path of the VNIC driver to help in profiling and fine
+	  tuning. This adds some overhead in the interest of gathering
+	  data.
diff --git a/drivers/infiniband/ulp/vnic/Makefile b/drivers/infiniband/ulp/vnic/Makefile
new file mode 100644
index 0000000..27aafae
--- /dev/null
+++ b/drivers/infiniband/ulp/vnic/Makefile
@@ -0,0 +1,12 @@
+obj-$(CONFIG_INFINIBAND_VNIC)			+= ib_vnic.o
+
+ib_vnic-y					:= vnic_main.o \
+						   vnic_ib.o \
+						   vnic_viport.o \
+						   vnic_control.o \
+						   vnic_data.o \
+						   vnic_netpath.o \
+						   vnic_config.o \
+						   vnic_sys.o
+
+ib_vnic-$(CONFIG_INFINIBAND_VNIC_STATS)		+= vnic_stats.o