[openib-general] OFED 1.1-RC7 build problem on SLES10
Scott Weitzenkamp (sweitzen)
sweitzen at cisco.com
Tue Oct 17 15:45:42 PDT 2006
You need the kernel-source RPM, I guess the OFED install.sh should check
for that RPM.
svbu-qa-opteron-1:~ # uname -a
Linux svbu-qa-opteron-1 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 UTC
2006 i68
6 athlon i386 GNU/Linux
svbu-qa-opteron-1:~ # rpm -qa | fgrep kernel
kernel-source-2.6.16.21-0.8
kernel-smp-2.6.16.21-0.8
kernel-ib-1.1-2.6.16.21_0.8_smp
kernel-ib-devel-1.1-2.6.16.21_0.8_smp
svbu-qa-opteron-1:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp
.config Makefile arch include2
.kernelrelease Module.symvers include scripts
Scott Weitzenkamp
SQA and Release Manager
Server Virtualization Business Unit
Cisco Systems
> -----Original Message-----
> From: openib-general-bounces at openib.org
> [mailto:openib-general-bounces at openib.org] On Behalf Of Chris Dennett
> Sent: Tuesday, October 17, 2006 12:46 PM
> To: openfabrics-ewg at openib.org; openib-general at openib.org
> Subject: [openib-general] OFED 1.1-RC7 build problem on SLES10
>
> I've been trying to install OFED 1.1 RC7 on an x86 server
> with a fresh install
> of SLES10 (32-bit). It errors out when trying to build the
> kernel modules.
> I've included what I think are the relevant log messages
> below. I've tried
> installing everything (minus iser and tvflash) or just the
> modules needed for
> SRP. I've installed 1.1 RC7 successfully on other RedHat
> servers without any
> problems. I am installing as root. Any help would be appreciated.
>
> Thanks.
>
> -Chris
>
> ==============================================
> + make kernel
> Building kernel modules
> Kernel version: 2.6.16.21-0.8-smp
> Modules directory: //lib/modules/2.6.16.21-0.8-smp
> Kernel sources: /lib/modules/2.6.16.21-0.8-smp/build
> env EXTRA_CFLAGS=" -I/var/tmp/OFEDRPM/BUILD/openib-1.1/include
> -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
>
> -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/ulp/ipoib \
>
> -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/debug" \
> make -C /lib/modules/2.6.16.21-0.8-smp/build
> SUBDIRS="/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband"
> KERNELRELEASE=2.6.16.21-0.8-smp \
> EXTRAVERSION=.21-0.8-smp V=1 \
> CONFIG_INFINIBAND=m \
> CONFIG_INFINIBAND_IPOIB=m \
> CONFIG_INFINIBAND_SDP= \
> CONFIG_INFINIBAND_SRP=m \
> CONFIG_INFINIBAND_USER_MAD=m \
> CONFIG_INFINIBAND_USER_ACCESS=m \
> CONFIG_INFINIBAND_ADDR_TRANS=y \
> CONFIG_INFINIBAND_MTHCA=m \
> CONFIG_INFINIBAND_IPOIB_DEBUG=y \
> CONFIG_INFINIBAND_ISER= \
> CONFIG_INFINIBAND_EHCA= \
> CONFIG_INFINIBAND_RDS= \
> CONFIG_INFINIBAND_RDS_DEBUG= \
> CONFIG_INFINIBAND_IPOIB_DEBUG_DATA= \
> CONFIG_INFINIBAND_SDP_SEND_ZCOPY= \
> CONFIG_INFINIBAND_SDP_RECV_ZCOPY= \
> CONFIG_INFINIBAND_SDP_DEBUG= \
> CONFIG_INFINIBAND_SDP_DEBUG_DATA= \
> CONFIG_INFINIBAND_IPATH= \
> CONFIG_INFINIBAND_MTHCA_DEBUG=y \
> CONFIG_INFINIBAND_MADEYE= \
> LINUXINCLUDE='-I/var/tmp/OFEDRPM/BUILD/openib-1.1/include \
>
> -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
> -Iinclude \
> $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
> -include include/linux/autoconf.h \
> -include
> /var/tmp/OFEDRPM/BUILD/openib-1.1/include/linux/autoconf.h \
> ' \
> modules
> make[1]: Entering directory
> `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
> make[1]: *** No rule to make target `modules'. Stop.
> make[1]: Leaving directory `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
> make: *** [kernel] Error 2
> error: Bad exit status from /var/tmp/rpm-tmp.92052 (%install)
>
>
> RPM build errors:
> user vlad does not exist - using root
> group mtl does not exist - using root
> user vlad does not exist - using root
> group mtl does not exist - using root
> Bad exit status from /var/tmp/rpm-tmp.92052 (%install)
> ERROR: Failed executing "rpmbuild --rebuild --define '_topdir
> /var/tmp/OFEDRPM' --define '_prefix /usr/local/ofed' --define
> 'build_root
> /var/tmp/OFED' --define 'configure_options --with-libibcommon
> --with-libibmad
> --with-libibumad --with-libibverbs --with-libmthca --with-opensm
> --with-librdmacm --with-openib-diags --with-srptools --with-mstflint
> --with-perftest --with-ipoib-mod --with-mthca-mod --with-srp-mod
> --with-core-mod --with-user_mad-mod --with-user_access-mod
> --with-addr_trans-mod' --define 'configure_options32 %{nil}' --define
> 'KVERSION 2.6.16.21-0.8-smp' --define 'KSRC
> /lib/modules/2.6.16.21-0.8-smp/build' --define
> 'build_kernel_ib 1' --define
> 'build_kernel_ib_devel 0' --define 'NETWORK_CONF_DIR
> /etc/sysconfig/network'
> --define 'modprobe_update 1' --define 'include_ipoib_conf 0' --define
> 'build_32bit 0' /root/OFED-1.1-rc7/SRPMS/openib-1.1-0.src.rpm"
>
> ===================================================
>
> smx32:~ # uname -a
> Linux linux-yeez 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39
> UTC 2006 i686
> i686 i386 GNU/Linux
> smx32:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp
> Module.symvers
>
>
>
> --
> Chris Dennett
> Design Engineer
> Texas Memory Systems, Inc.
> 713-266-3200 x430
> Chris.Dennett at texmemsys.com
>
>
> _______________________________________________
> openib-general mailing list
> openib-general at openib.org
> http://openib.org/mailman/listinfo/openib-general
>
> To unsubscribe, please visit
> http://openib.org/mailman/listinfo/openib-general
>
More information about the general
mailing list