[openib-general] [openfabrics-ewg] OFED 1.1-RC7 build problem on SLES10
Erez Zilber
erezz at voltaire.com
Wed Oct 18 05:40:40 PDT 2006
When I ran the install script without having the kernel sources rpm on
SLES 10, I had to wait several minutes before it failed. Shouldn't the
script check such dependencies before starting the build process?
Erez
Vladimir Sokolovsky wrote:
>
> Hi,
> OFED installation script check that the directory
> /lib/modules/`uname -r`/build/ and the file
> /lib/modules/`uname -r`/build/Makefle exist.
> It does not check for kernel-source RPM because of kernels from
> kernel.org support.
>
>
> --
>
> Regards,
> Vladimir
>
> On Tue, 2006-10-17 at 15:45 -0700, Scott Weitzenkamp (sweitzen) wrote:
> > You need the kernel-source RPM, I guess the OFED install.sh should check
> > for that RPM.
> >
> > svbu-qa-opteron-1:~ # uname -a
> > Linux svbu-qa-opteron-1 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 UTC
> > 2006 i68
> > 6 athlon i386 GNU/Linux
> > svbu-qa-opteron-1:~ # rpm -qa | fgrep kernel
> > kernel-source-2.6.16.21-0.8
> > kernel-smp-2.6.16.21-0.8
> > kernel-ib-1.1-2.6.16.21_0.8_smp
> > kernel-ib-devel-1.1-2.6.16.21_0.8_smp
> > svbu-qa-opteron-1:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp
> > .config Makefile arch include2
> > .kernelrelease Module.symvers include scripts
> >
> > Scott Weitzenkamp
> > SQA and Release Manager
> > Server Virtualization Business Unit
> > Cisco Systems
> >
> >
> > > -----Original Message-----
> > > From: openib-general-bounces at openib.org
> > > [mailto:openib-general-bounces at openib.org] On Behalf Of Chris Dennett
> > > Sent: Tuesday, October 17, 2006 12:46 PM
> > > To: openfabrics-ewg at openib.org; openib-general at openib.org
> > > Subject: [openib-general] OFED 1.1-RC7 build problem on SLES10
> > >
> > > I've been trying to install OFED 1.1 RC7 on an x86 server
> > > with a fresh install
> > > of SLES10 (32-bit). It errors out when trying to build the
> > > kernel modules.
> > > I've included what I think are the relevant log messages
> > > below. I've tried
> > > installing everything (minus iser and tvflash) or just the
> > > modules needed for
> > > SRP. I've installed 1.1 RC7 successfully on other RedHat
> > > servers without any
> > > problems. I am installing as root. Any help would be appreciated.
> > >
> > > Thanks.
> > >
> > > -Chris
> > >
> > > ==============================================
> > > + make kernel
> > > Building kernel modules
> > > Kernel version: 2.6.16.21-0.8-smp
> > > Modules directory: //lib/modules/2.6.16.21-0.8-smp
> > > Kernel sources: /lib/modules/2.6.16.21-0.8-smp/build
> > > env EXTRA_CFLAGS=" -I/var/tmp/OFEDRPM/BUILD/openib-1.1/include
> > > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
> > >
> > > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/ulp/ipoib \
> > >
> > > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/debug" \
> > > make -C /lib/modules/2.6.16.21-0.8-smp/build
> > > SUBDIRS="/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband"
> > > KERNELRELEASE=2.6.16.21-0.8-smp \
> > > EXTRAVERSION=.21-0.8-smp V=1 \
> > > CONFIG_INFINIBAND=m \
> > > CONFIG_INFINIBAND_IPOIB=m \
> > > CONFIG_INFINIBAND_SDP= \
> > > CONFIG_INFINIBAND_SRP=m \
> > > CONFIG_INFINIBAND_USER_MAD=m \
> > > CONFIG_INFINIBAND_USER_ACCESS=m \
> > > CONFIG_INFINIBAND_ADDR_TRANS=y \
> > > CONFIG_INFINIBAND_MTHCA=m \
> > > CONFIG_INFINIBAND_IPOIB_DEBUG=y \
> > > CONFIG_INFINIBAND_ISER= \
> > > CONFIG_INFINIBAND_EHCA= \
> > > CONFIG_INFINIBAND_RDS= \
> > > CONFIG_INFINIBAND_RDS_DEBUG= \
> > > CONFIG_INFINIBAND_IPOIB_DEBUG_DATA= \
> > > CONFIG_INFINIBAND_SDP_SEND_ZCOPY= \
> > > CONFIG_INFINIBAND_SDP_RECV_ZCOPY= \
> > > CONFIG_INFINIBAND_SDP_DEBUG= \
> > > CONFIG_INFINIBAND_SDP_DEBUG_DATA= \
> > > CONFIG_INFINIBAND_IPATH= \
> > > CONFIG_INFINIBAND_MTHCA_DEBUG=y \
> > > CONFIG_INFINIBAND_MADEYE= \
> > > LINUXINCLUDE='-I/var/tmp/OFEDRPM/BUILD/openib-1.1/include \
> > >
> > > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
> > > -Iinclude \
> > > $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
> > > -include include/linux/autoconf.h \
> > > -include
> > > /var/tmp/OFEDRPM/BUILD/openib-1.1/include/linux/autoconf.h \
> > > ' \
> > > modules
> > > make[1]: Entering directory
> > > `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
> > > make[1]: *** No rule to make target `modules'. Stop.
> > > make[1]: Leaving directory `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
> > > make: *** [kernel] Error 2
> > > error: Bad exit status from /var/tmp/rpm-tmp.92052 (%install)
> > >
> > >
> > > RPM build errors:
> > > user vlad does not exist - using root
> > > group mtl does not exist - using root
> > > user vlad does not exist - using root
> > > group mtl does not exist - using root
> > > Bad exit status from /var/tmp/rpm-tmp.92052 (%install)
> > > ERROR: Failed executing "rpmbuild --rebuild --define '_topdir
> > > /var/tmp/OFEDRPM' --define '_prefix /usr/local/ofed' --define
> > > 'build_root
> > > /var/tmp/OFED' --define 'configure_options --with-libibcommon
> > > --with-libibmad
> > > --with-libibumad --with-libibverbs --with-libmthca --with-opensm
> > > --with-librdmacm --with-openib-diags --with-srptools --with-mstflint
> > > --with-perftest --with-ipoib-mod --with-mthca-mod --with-srp-mod
> > > --with-core-mod --with-user_mad-mod --with-user_access-mod
> > > --with-addr_trans-mod' --define 'configure_options32 %{nil}' --define
> > > 'KVERSION 2.6.16.21-0.8-smp' --define 'KSRC
> > > /lib/modules/2.6.16.21-0.8-smp/build' --define
> > > 'build_kernel_ib 1' --define
> > > 'build_kernel_ib_devel 0' --define 'NETWORK_CONF_DIR
> > > /etc/sysconfig/network'
> > > --define 'modprobe_update 1' --define 'include_ipoib_conf 0' --define
> > > 'build_32bit 0' /root/OFED-1.1-rc7/SRPMS/openib-1.1-0.src.rpm"
> > >
> > > ===================================================
> > >
> > > smx32:~ # uname -a
> > > Linux linux-yeez 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39
> > > UTC 2006 i686
> > > i686 i386 GNU/Linux
> > > smx32:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp
> > > Module.symvers
> > >
> > >
> > >
> > > --
> > > Chris Dennett
> > > Design Engineer
> > > Texas Memory Systems, Inc.
> > > 713-266-3200 x430
> > > Chris.Dennett at texmemsys.com
> > >
> > >
> > > _______________________________________________
> > > openib-general mailing list
> > > openib-general at openib.org
> > > http://openib.org/mailman/listinfo/openib-general
> > >
> > > To unsubscribe, please visit
> > > http://openib.org/mailman/listinfo/openib-general
> > >
> >
> > _______________________________________________
> > openfabrics-ewg mailing list
> > openfabrics-ewg at openib.org
> > http://openib.org/mailman/listinfo/openfabrics-ewg
>
>
> _______________________________________________
> openfabrics-ewg mailing list
> openfabrics-ewg at openib.org
> http://openib.org/mailman/listinfo/openfabrics-ewg
>
More information about the general
mailing list