[ofa-general] [PATCH] opensm: fix outstanding mad counters tracking
Ira Weiny
weiny2 at llnl.gov
Mon Aug 20 09:34:30 PDT 2007
Sasha,
Should this be applied to 1.2?
Ira
On Mon, 20 Aug 2007 16:35:30 +0300
Sasha Khapyorsky <sashak at voltaire.com> wrote:
>
> When MAD sending fails in osm_vendor_send() the send_err_callback() is
> invoked - this callback maintains (decreases by 1) the outstanding MAD
> counters. In the current osm_vl15_poller() code those MAD counters are
> also explicitly decreased in the case when osm_vendor_send() returns
> error - so actually we have "double free" case and as result OpenSM
> deadlocks there.
>
> This patch removes this additional outstanding mad counters decreasing
> code from osm_vl15_poller().
>
> Signed-off-by: Sasha Khapyorsky <sashak at voltaire.com>
> ---
> opensm/include/opensm/osm_vl15intf.h | 28 +---------
> opensm/opensm/osm_opensm.c | 7 +-
> opensm/opensm/osm_vl15intf.c | 103 +++++-----------------------------
> 3 files changed, 18 insertions(+), 120 deletions(-)
>
> diff --git a/opensm/include/opensm/osm_vl15intf.h b/opensm/include/opensm/osm_vl15intf.h
> index 6de9898..4b290d3 100644
> --- a/opensm/include/opensm/osm_vl15intf.h
> +++ b/opensm/include/opensm/osm_vl15intf.h
> @@ -53,13 +53,11 @@
> #include <complib/cl_event.h>
> #include <complib/cl_thread.h>
> #include <complib/cl_qlist.h>
> -#include <complib/cl_passivelock.h>
> #include <opensm/osm_stats.h>
> #include <opensm/osm_log.h>
> #include <opensm/osm_madw.h>
> #include <opensm/osm_mad_pool.h>
> #include <vendor/osm_vendor.h>
> -#include <opensm/osm_subnet.h>
>
> #ifdef __cplusplus
> # define BEGIN_C_DECLS extern "C" {
> @@ -132,10 +130,6 @@ typedef struct _osm_vl15 {
> osm_vendor_t *p_vend;
> osm_log_t *p_log;
> osm_stats_t *p_stats;
> - osm_subn_t *p_subn;
> - cl_disp_reg_handle_t h_disp;
> - cl_plock_t *p_lock;
> -
> } osm_vl15_t;
> /*
> * FIELDS
> @@ -174,15 +168,6 @@ typedef struct _osm_vl15 {
> * p_stats
> * Pointer to the OpenSM statistics block.
> *
> -* p_subn
> -* Pointer to the Subnet object for this subnet.
> -*
> -* h_disp
> -* Handle returned from dispatcher registration.
> -*
> -* p_lock
> -* Pointer to the serializing lock.
> -*
> * SEE ALSO
> * VL15 object
> *********/
> @@ -267,9 +252,7 @@ osm_vl15_init(IN osm_vl15_t * const p_vl15,
> IN osm_vendor_t * const p_vend,
> IN osm_log_t * const p_log,
> IN osm_stats_t * const p_stats,
> - IN const int32_t max_wire_smps,
> - IN osm_subn_t * const p_subn,
> - IN cl_dispatcher_t * const p_disp, IN cl_plock_t * const p_lock);
> + IN const int32_t max_wire_smps);
> /*
> * PARAMETERS
> * p_vl15
> @@ -287,15 +270,6 @@ osm_vl15_init(IN osm_vl15_t * const p_vl15,
> * max_wire_smps
> * [in] Maximum number of MADs allowed on the wire at one time.
> *
> -* p_subn
> -* [in] Pointer to the subnet object.
> -*
> -* p_disp
> -* [in] Pointer to the dispatcher object.
> -*
> -* p_lock
> -* [in] Pointer to the OpenSM serializing lock.
> -*
> * RETURN VALUES
> * IB_SUCCESS if the VL15 object was initialized successfully.
> *
> diff --git a/opensm/opensm/osm_opensm.c b/opensm/opensm/osm_opensm.c
> index 9a596dd..329305e 100644
> --- a/opensm/opensm/osm_opensm.c
> +++ b/opensm/opensm/osm_opensm.c
> @@ -249,10 +249,9 @@ osm_opensm_init(IN osm_opensm_t * const p_osm,
> if (status != IB_SUCCESS)
> goto Exit;
>
> - status = osm_vl15_init(&p_osm->vl15,
> - p_osm->p_vendor,
> - &p_osm->log, &p_osm->stats, p_opt->max_wire_smps,
> - &p_osm->subn, &p_osm->disp, &p_osm->lock);
> + status = osm_vl15_init(&p_osm->vl15, p_osm->p_vendor,
> + &p_osm->log, &p_osm->stats,
> + p_opt->max_wire_smps);
> if (status != IB_SUCCESS)
> goto Exit;
>
> diff --git a/opensm/opensm/osm_vl15intf.c b/opensm/opensm/osm_vl15intf.c
> index bc667b6..af44423 100644
> --- a/opensm/opensm/osm_vl15intf.c
> +++ b/opensm/opensm/osm_vl15intf.c
> @@ -51,13 +51,12 @@
>
> #include <string.h>
> #include <iba/ib_types.h>
> +#include <complib/cl_thread.h>
> +#include <vendor/osm_vendor_api.h>
> #include <opensm/osm_vl15intf.h>
> #include <opensm/osm_madw.h>
> -#include <vendor/osm_vendor_api.h>
> #include <opensm/osm_log.h>
> #include <opensm/osm_helper.h>
> -#include <complib/cl_thread.h>
> -#include <signal.h>
>
> /**********************************************************************
> **********************************************************************/
> @@ -65,18 +64,13 @@
> static void vl15_send_mad(osm_vl15_t * p_vl, osm_madw_t * p_madw)
> {
> ib_api_status_t status;
> - cl_status_t cl_status;
> - uint32_t mads_sent;
> - uint32_t unicasts_sent;
> - uint32_t mads_on_wire;
> - uint32_t outstanding;
>
> /*
> Non-response-expected mads are not throttled on the wire
> since we can have no confirmation that they arrived
> at their destination.
> */
> - if (p_madw->resp_expected == TRUE) {
> + if (p_madw->resp_expected == TRUE)
> /*
> Note that other threads may not see the response MAD
> arrive before send() even returns.
> @@ -84,14 +78,11 @@ static void vl15_send_mad(osm_vl15_t * p_vl, osm_madw_t * p_madw)
> To avoid this confusion, preincrement the counts on the
> assumption that send() will succeed.
> */
> - mads_on_wire =
> - cl_atomic_inc(&p_vl->p_stats->qp0_mads_outstanding_on_wire);
> - CL_ASSERT(mads_on_wire <= p_vl->max_wire_smps);
> - } else
> - unicasts_sent =
> - cl_atomic_inc(&p_vl->p_stats->qp0_unicasts_sent);
> + cl_atomic_inc(&p_vl->p_stats->qp0_mads_outstanding_on_wire);
> + else
> + cl_atomic_inc(&p_vl->p_stats->qp0_unicasts_sent);
>
> - mads_sent = cl_atomic_inc(&p_vl->p_stats->qp0_mads_sent);
> + cl_atomic_inc(&p_vl->p_stats->qp0_mads_sent);
>
> status = osm_vendor_send(osm_madw_get_bind_handle(p_madw),
> p_madw, p_madw->resp_expected);
> @@ -118,61 +109,12 @@ static void vl15_send_mad(osm_vl15_t * p_vl, osm_madw_t * p_madw)
> fix up the pre-incremented count values.
> */
>
> - /* Decrement qp0_mads_sent and qp0_mads_outstanding_on_wire
> - that were incremented in the code above. */
> - mads_sent = cl_atomic_dec(&p_vl->p_stats->qp0_mads_sent);
> -
> - if (p_madw->resp_expected == FALSE)
> - return;
> -
> - cl_atomic_dec(&p_vl->p_stats->qp0_mads_outstanding_on_wire);
> -
> - /*
> - The following code is similar to the code in
> - __osm_sm_mad_ctrl_retire_trans_mad. We need to decrement the
> - qp0_mads_outstanding counter, and if we reached 0 - need to call
> - the cl_disp_post with OSM_SIGNAL_NO_PENDING_TRANSACTION (in order
> - to wake up the state mgr).
> - There is one difference from the code in __osm_sm_mad_ctrl_retire_trans_mad.
> - This code is called for all (vl15) mads, if osm_vendor_send() failed, unlike
> - __osm_sm_mad_ctrl_retire_trans_mad which is called only on mads where
> - resp_expected == TRUE. As a result, the qp0_mads_outstanding counter
> - should be decremented and handled accordingly only if this is a mad
> - with resp_expected == TRUE.
> - */
> -
> - outstanding = cl_atomic_dec(&p_vl->p_stats->qp0_mads_outstanding);
> -
> - osm_log(p_vl->p_log, OSM_LOG_DEBUG,
> - "__osm_vl15_poller: "
> - "%u QP0 MADs outstanding\n",
> - p_vl->p_stats->qp0_mads_outstanding);
> -
> - if (outstanding)
> - return;
> -
> - /*
> - The wire is clean.
> - Signal the state manager.
> - */
> - if (osm_log_is_active(p_vl->p_log, OSM_LOG_DEBUG))
> - osm_log(p_vl->p_log,
> - OSM_LOG_DEBUG,
> - "__osm_vl15_poller: "
> - "Posting Dispatcher message %s\n",
> - osm_get_disp_msg_str(OSM_MSG_NO_SMPS_OUTSTANDING));
> -
> - cl_status = cl_disp_post(p_vl->h_disp,
> - OSM_MSG_NO_SMPS_OUTSTANDING, (void *)
> - OSM_SIGNAL_NO_PENDING_TRANSACTIONS,
> - NULL, NULL);
> -
> - if (cl_status != CL_SUCCESS)
> - osm_log(p_vl->p_log,
> - OSM_LOG_ERROR,
> - "__osm_vl15_poller: ERR 3E06: "
> - "Dispatcher post message failed (%s)\n",
> - CL_STATUS_MSG(cl_status));
> + /* Decrement qp0_mads_sent that were incremented in the code above.
> + qp0_mads_outstanding will be decremented by send error callback
> + (called by osm_vendor_send() */
> + cl_atomic_dec(&p_vl->p_stats->qp0_mads_sent);
> + if (!p_madw->resp_expected)
> + cl_atomic_dec(&p_vl->p_stats->qp0_unicasts_sent);
> }
>
> static void __osm_vl15_poller(IN void *p_ptr)
> @@ -260,7 +202,6 @@ void osm_vl15_construct(IN osm_vl15_t * const p_vl)
> cl_qlist_init(&p_vl->rfifo);
> cl_qlist_init(&p_vl->ufifo);
> cl_thread_construct(&p_vl->poller);
> - p_vl->h_disp = CL_DISP_INVALID_HANDLE;
> }
>
> /**********************************************************************
> @@ -317,9 +258,7 @@ osm_vl15_init(IN osm_vl15_t * const p_vl,
> IN osm_vendor_t * const p_vend,
> IN osm_log_t * const p_log,
> IN osm_stats_t * const p_stats,
> - IN const int32_t max_wire_smps,
> - IN osm_subn_t * const p_subn,
> - IN cl_dispatcher_t * const p_disp, IN cl_plock_t * const p_lock)
> + IN const int32_t max_wire_smps)
> {
> ib_api_status_t status = IB_SUCCESS;
>
> @@ -329,8 +268,6 @@ osm_vl15_init(IN osm_vl15_t * const p_vl,
> p_vl->p_log = p_log;
> p_vl->p_stats = p_stats;
> p_vl->max_wire_smps = max_wire_smps;
> - p_vl->p_subn = p_subn;
> - p_vl->p_lock = p_lock;
>
> status = cl_event_init(&p_vl->signal, FALSE);
> if (status != IB_SUCCESS)
> @@ -351,16 +288,6 @@ osm_vl15_init(IN osm_vl15_t * const p_vl,
> if (status != IB_SUCCESS)
> goto Exit;
>
> - p_vl->h_disp = cl_disp_register(p_disp, CL_DISP_MSGID_NONE, NULL, NULL);
> -
> - if (p_vl->h_disp == CL_DISP_INVALID_HANDLE) {
> - osm_log(p_log, OSM_LOG_ERROR,
> - "osm_vl15_init: ERR 3E01: "
> - "Dispatcher registration failed\n");
> - status = IB_INSUFFICIENT_RESOURCES;
> - goto Exit;
> - }
> -
> Exit:
> OSM_LOG_EXIT(p_log);
> return (status);
> @@ -444,8 +371,6 @@ osm_vl15_shutdown(IN osm_vl15_t * const p_vl,
> /* grap a lock on the object */
> cl_spinlock_acquire(&p_vl->lock);
>
> - cl_disp_unregister(p_vl->h_disp);
> -
> /* go over all outstanding MADs and retire their transactions */
>
> /* first we handle the list of response MADs */
> --
> 1.5.3.rc2.29.gc4640f
>
> _______________________________________________
> general mailing list
> general at lists.openfabrics.org
> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
More information about the general
mailing list