[ofa-general] [PATCH] Remove verbose debug from ib_echa

[Christoph Raisch]

Hi Anton,

general-bounces at lists.openfabrics.org wrote on 29.08.2007 15:42:53:

>
> Hi,
>
> While debugging an ib_ehca issue I ended up with raw hcalls in dmesg:
>
> PU0003 EHCA_ERR:ehca_plpar_hcall9 opcode=168 ret=ffffffffffffffd3
> arg1=103d001403000002 arg2=203d0000000000a1 arg3=8a40000000000000
> arg4=5a5b4c000 arg5=0 arg6=0 arg7=0 arg8=0 arg9=0 out1=0 out2=0
> out3=0 out4=2 out5=0 out6=800000000005f254 out7=0 out8=0 out9=0
>

We don't think this is the right approach to just remove these warnings,
they are there for a good reason. It's the same place used by all mainline
operatins which return good return codes in "normal life".
Startup is the only time when this is a bit too chatty.

At the moment ib_mad just breaks the complete adapter if one port is not
active.

I would suggest to define IB startup sequence which only uses ports
that are active in ib_mad instead.


Gruss / Regards
Christoph Raisch