[ofa-general] SDP and iWARP in OFED 1.2?

Steve Wise swise at opengridcomputing.com
Fri Dec 14 11:34:55 PST 2007



Craig Prescott wrote:
> Steve Wise wrote:
>>
>>
>> Craig Prescott wrote:
>>>
> <snip>
>>> Is SDP on iWARP supposed to work in OFED 1.2?  Any advice
>>> or hints on getting it working would be most appreciated.
>>>
>>
>> Unfortunately, SDP over Chelsio's iWARP rnic hasn't been tested at 
>> all and is not supported.
>>
>> Also, if you want to use RDMA over Chelsio's rnic, I recommend you 
>> get the latest 1.2.5.4 daily build which has all the current cxgb3 
>> fixes included.
>>
>> Alsoalso, Chelsio has TOE/Sockets drivers available on their web site 
>> to support full TCP offload via the sockets interface.  Checkout 
>> http://service.chelsio.com for the source.
>
> Thanks for the advice!  I will try out the 1.2.5.4 daily build
> on our hosts with the Chelsio RNICs and visit service.chelsio.com.
> I am still interested in SDP on iWARP, though - are there any
> OFED-supported RNICs over which SDP would work?
>
Chelsio is the only iWARP driver in ofed-1.2.x.  ofed-1.3 has NetEffect 
too.  Dunno if they support SDP.

If you go up to 1.2.5.4 or ofed-1.3-rc1 and try out SDP over chelsio, 
I'll help ya debug stuff as time permits.

> As I mentioned, the nodes with the Chelsio RNICs also have mthca
> devices connected to our IB fabric.  Are 1.2 and 1.2.5.x meant to
> be interoperable?

They should be.  Its just that there are a few dozen bug fixes from 1.2 
to 1.2.5.4 in the chelsio drivers.  Also, if you go up to 1.2.5.4, 
you'll need the 5.0 firmware from cheslio's web site.  Pull down the 
firmware and put it in /lib/firmware.  Then it should get upgraded 
automagically.

Stevo.




More information about the general mailing list