[ofa-general] OFED-1.2-20070318-0600 build failure - qlvnictools

[Kuchimanchi, Ramachandra]

Mostyn,

We have successfully installed OFED 1.2 Beta with qlvnictools on SLES10.

We have not yet tested the specific build you mentioned (OFED-1.2-20070318-0600).
We will try out the latest build and investigate any problems that we see.

Regards,
Ram



-----Original Message-----
From: general-bounces at lists.openfabrics.org on behalf of mrl at eskimo.com
Sent: Mon 3/19/2007 3:47 AM
To: general at lists.openfabrics.org
Subject: [ofa-general] OFED-1.2-20070318-0600 build failure - qlvnictools
 
Using SLES10 and OFED-1.2-20070318-0600, a build.sh/install.sh fails in userland in
qlvnictools with:

make[1]: Entering directory `/var/tmp/OFEDRPM/BUILD/ofa_user-1.2/src/userspace/qlvnictools/ibvexdmto
ols' 
 cd . && /bin/sh /var/tmp/OFEDRPM/BUILD/ofa_user-1.2/src/userspace/qlvnictools/ibvexdmtools/config/m
issing --run automake-1.9 --foreign
configure.in:9: version mismatch.  This is Automake 1.9.6,  
configure.in:9: but the definition used by this AM_INIT_AUTOMAKE
configure.in:9: comes from Automake 1.9.2.  You should recreate
configure.in:9: aclocal.m4 with aclocal and run automake again.
make[1]: *** [Makefile.in] Error 1
make[1]: Leaving directory `/var/tmp/OFEDRPM/BUILD/ofa_user-1.2/src/userspace/qlvnictools/ibvexdmtoo
ls'
make: *** [qlvnictools] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.9704 (%install)

Leaving out qlvnictools and doing a rpmbuild of userspace by hand and all else works.

/usr/bin/automake --version
automake (GNU automake) 1.9.6


Is there an easy (or not so easy) way around this, folks?

Mostyn
_______________________________________________
general mailing list
general at lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general

To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20070320/31f0c8bc/attachment.html>