[ofa-general] LMC read_bw test

[Chevchenkovic Chevchenkovic]

Hi,
 I had this problem. I had the following configuration problem:
node 1 : port 1  : LMC = 1 , LIDs = 12,13
node 2 : port 1  : LMC = 1 , LIDs = 18,19

Now when I run the read_bw test with the lids set as 12 and 18, the
test runs fine with no errors. But if I set the value to 13 and 19 , I
get an error in execution. The error is in completion queue.
 How do i get over this?

Awaiting reply,
-chev