[ofa-general] [GIT PULL] please pull infiniband.git
Roland Dreier
rdreier at cisco.com
Tue May 29 16:20:39 PDT 2007
Linus, please pull from
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git for-linus
This tree is also available from kernel.org mirrors at:
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git for-linus
This will get a few more nicely balanced ("55 insertions(+), 55
deletions(-)") 2.6.22-rc3 fixes, mostly for IPoIB connected mode:
Michael S. Tsirkin (2):
IB/mthca: Fix handling of send CQE with error for QPs connected to SRQ
IPoIB/cm: Fix performance regression on Mellanox
Roland Dreier (1):
IB/mlx4: Fix last allocated object tracking in bitmap allocator
Sean Hefty (1):
IB/cm: Fix stale connection detection
drivers/infiniband/core/cm.c | 25 ++++++-----
drivers/infiniband/hw/mthca/mthca_qp.c | 6 +-
drivers/infiniband/ulp/ipoib/ipoib.h | 3 +-
drivers/infiniband/ulp/ipoib/ipoib_cm.c | 74 +++++++++++++++----------------
drivers/net/mlx4/alloc.c | 2 +-
5 files changed, 55 insertions(+), 55 deletions(-)
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index e840434..40c004a 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -1297,26 +1297,29 @@ static struct cm_id_private * cm_match_req(struct cm_work *work,
req_msg = (struct cm_req_msg *)work->mad_recv_wc->recv_buf.mad;
- /* Check for duplicate REQ and stale connections. */
+ /* Check for possible duplicate REQ. */
spin_lock_irqsave(&cm.lock, flags);
timewait_info = cm_insert_remote_id(cm_id_priv->timewait_info);
- if (!timewait_info)
- timewait_info = cm_insert_remote_qpn(cm_id_priv->timewait_info);
-
if (timewait_info) {
cur_cm_id_priv = cm_get_id(timewait_info->work.local_id,
timewait_info->work.remote_id);
- cm_cleanup_timewait(cm_id_priv->timewait_info);
spin_unlock_irqrestore(&cm.lock, flags);
if (cur_cm_id_priv) {
cm_dup_req_handler(work, cur_cm_id_priv);
cm_deref_id(cur_cm_id_priv);
- } else
- cm_issue_rej(work->port, work->mad_recv_wc,
- IB_CM_REJ_STALE_CONN, CM_MSG_RESPONSE_REQ,
- NULL, 0);
- listen_cm_id_priv = NULL;
- goto out;
+ }
+ return NULL;
+ }
+
+ /* Check for stale connections. */
+ timewait_info = cm_insert_remote_qpn(cm_id_priv->timewait_info);
+ if (timewait_info) {
+ cm_cleanup_timewait(cm_id_priv->timewait_info);
+ spin_unlock_irqrestore(&cm.lock, flags);
+ cm_issue_rej(work->port, work->mad_recv_wc,
+ IB_CM_REJ_STALE_CONN, CM_MSG_RESPONSE_REQ,
+ NULL, 0);
+ return NULL;
}
/* Find matching listen request. */
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 0276649..eef415b 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -2284,10 +2284,10 @@ void mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send,
struct mthca_next_seg *next;
/*
- * For SRQs, all WQEs generate a CQE, so we're always at the
- * end of the doorbell chain.
+ * For SRQs, all receive WQEs generate a CQE, so we're always
+ * at the end of the doorbell chain.
*/
- if (qp->ibqp.srq) {
+ if (qp->ibqp.srq && !is_send) {
*new_wqe = 0;
return;
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index 158759e..285c143 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -156,7 +156,7 @@ struct ipoib_cm_data {
* - and then invoke a Destroy QP or Reset QP.
*
* We use the second option and wait for a completion on the
- * rx_drain_qp before destroying QPs attached to our SRQ.
+ * same CQ before destroying QPs attached to our SRQ.
*/
enum ipoib_cm_state {
@@ -199,7 +199,6 @@ struct ipoib_cm_dev_priv {
struct ib_srq *srq;
struct ipoib_cm_rx_buf *srq_ring;
struct ib_cm_id *id;
- struct ib_qp *rx_drain_qp; /* generates WR described in 10.3.1 */
struct list_head passive_ids; /* state: LIVE */
struct list_head rx_error_list; /* state: ERROR */
struct list_head rx_flush_list; /* state: FLUSH, drain not started */
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index f133b56..076a0bb 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -69,8 +69,9 @@ static struct ib_qp_attr ipoib_cm_err_attr = {
#define IPOIB_CM_RX_DRAIN_WRID 0x7fffffff
-static struct ib_recv_wr ipoib_cm_rx_drain_wr = {
- .wr_id = IPOIB_CM_RX_DRAIN_WRID
+static struct ib_send_wr ipoib_cm_rx_drain_wr = {
+ .wr_id = IPOIB_CM_RX_DRAIN_WRID,
+ .opcode = IB_WR_SEND,
};
static int ipoib_cm_tx_handler(struct ib_cm_id *cm_id,
@@ -163,16 +164,22 @@ partial_error:
static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv* priv)
{
- struct ib_recv_wr *bad_wr;
+ struct ib_send_wr *bad_wr;
+ struct ipoib_cm_rx *p;
- /* rx_drain_qp send queue depth is 1, so
+ /* We only reserved 1 extra slot in CQ for drain WRs, so
* make sure we have at most 1 outstanding WR. */
if (list_empty(&priv->cm.rx_flush_list) ||
!list_empty(&priv->cm.rx_drain_list))
return;
- if (ib_post_recv(priv->cm.rx_drain_qp, &ipoib_cm_rx_drain_wr, &bad_wr))
- ipoib_warn(priv, "failed to post rx_drain wr\n");
+ /*
+ * QPs on flush list are error state. This way, a "flush
+ * error" WC will be immediately generated for each WR we post.
+ */
+ p = list_entry(priv->cm.rx_flush_list.next, typeof(*p), list);
+ if (ib_post_send(p->qp, &ipoib_cm_rx_drain_wr, &bad_wr))
+ ipoib_warn(priv, "failed to post drain wr\n");
list_splice_init(&priv->cm.rx_flush_list, &priv->cm.rx_drain_list);
}
@@ -199,10 +206,10 @@ static struct ib_qp *ipoib_cm_create_rx_qp(struct net_device *dev,
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ib_qp_init_attr attr = {
.event_handler = ipoib_cm_rx_event_handler,
- .send_cq = priv->cq, /* does not matter, we never send anything */
+ .send_cq = priv->cq, /* For drain WR */
.recv_cq = priv->cq,
.srq = priv->cm.srq,
- .cap.max_send_wr = 1, /* FIXME: 0 Seems not to work */
+ .cap.max_send_wr = 1, /* For drain WR */
.cap.max_send_sge = 1, /* FIXME: 0 Seems not to work */
.sq_sig_type = IB_SIGNAL_ALL_WR,
.qp_type = IB_QPT_RC,
@@ -242,6 +249,27 @@ static int ipoib_cm_modify_rx_qp(struct net_device *dev,
ipoib_warn(priv, "failed to modify QP to RTR: %d\n", ret);
return ret;
}
+
+ /*
+ * Current Mellanox HCA firmware won't generate completions
+ * with error for drain WRs unless the QP has been moved to
+ * RTS first. This work-around leaves a window where a QP has
+ * moved to error asynchronously, but this will eventually get
+ * fixed in firmware, so let's not error out if modify QP
+ * fails.
+ */
+ qp_attr.qp_state = IB_QPS_RTS;
+ ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask);
+ if (ret) {
+ ipoib_warn(priv, "failed to init QP attr for RTS: %d\n", ret);
+ return 0;
+ }
+ ret = ib_modify_qp(qp, &qp_attr, qp_attr_mask);
+ if (ret) {
+ ipoib_warn(priv, "failed to modify QP to RTS: %d\n", ret);
+ return 0;
+ }
+
return 0;
}
@@ -623,38 +651,11 @@ static void ipoib_cm_tx_completion(struct ib_cq *cq, void *tx_ptr)
int ipoib_cm_dev_open(struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
- struct ib_qp_init_attr qp_init_attr = {
- .send_cq = priv->cq, /* does not matter, we never send anything */
- .recv_cq = priv->cq,
- .cap.max_send_wr = 1, /* FIXME: 0 Seems not to work */
- .cap.max_send_sge = 1, /* FIXME: 0 Seems not to work */
- .cap.max_recv_wr = 1,
- .cap.max_recv_sge = 1, /* FIXME: 0 Seems not to work */
- .sq_sig_type = IB_SIGNAL_ALL_WR,
- .qp_type = IB_QPT_UC,
- };
int ret;
if (!IPOIB_CM_SUPPORTED(dev->dev_addr))
return 0;
- priv->cm.rx_drain_qp = ib_create_qp(priv->pd, &qp_init_attr);
- if (IS_ERR(priv->cm.rx_drain_qp)) {
- printk(KERN_WARNING "%s: failed to create CM ID\n", priv->ca->name);
- ret = PTR_ERR(priv->cm.rx_drain_qp);
- return ret;
- }
-
- /*
- * We put the QP in error state directly. This way, a "flush
- * error" WC will be immediately generated for each WR we post.
- */
- ret = ib_modify_qp(priv->cm.rx_drain_qp, &ipoib_cm_err_attr, IB_QP_STATE);
- if (ret) {
- ipoib_warn(priv, "failed to modify drain QP to error: %d\n", ret);
- goto err_qp;
- }
-
priv->cm.id = ib_create_cm_id(priv->ca, ipoib_cm_rx_handler, dev);
if (IS_ERR(priv->cm.id)) {
printk(KERN_WARNING "%s: failed to create CM ID\n", priv->ca->name);
@@ -676,8 +677,6 @@ err_listen:
ib_destroy_cm_id(priv->cm.id);
err_cm:
priv->cm.id = NULL;
-err_qp:
- ib_destroy_qp(priv->cm.rx_drain_qp);
return ret;
}
@@ -740,7 +739,6 @@ void ipoib_cm_dev_stop(struct net_device *dev)
kfree(p);
}
- ib_destroy_qp(priv->cm.rx_drain_qp);
cancel_delayed_work(&priv->cm.stale_task);
}
diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/mlx4/alloc.c
index dfbd580..f8d63d3 100644
--- a/drivers/net/mlx4/alloc.c
+++ b/drivers/net/mlx4/alloc.c
@@ -51,8 +51,8 @@ u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap)
if (obj < bitmap->max) {
set_bit(obj, bitmap->table);
+ bitmap->last = (obj + 1) & (bitmap->max - 1);
obj |= bitmap->top;
- bitmap->last = obj + 1;
} else
obj = -1;
More information about the general
mailing list