[ofa-general] [openSM] Pkey index and Pkey value

[Hal Rosenstock]

On 11/12/07, Keshetti Mahesh <keshetti85-student at yahoo.co.in> wrote:
> If I load the below partition configuration file using openSM,
>
> Default=0x7fff : ALL, SELF=full ;
> Partition1 = 0x0001 : 0x1234=full, 0x5678=limi, 0x9012 ;
> Partition2 = 0x0002 : 0x2468=full, 0x5678=limi, 0x9012 ;
>
> I am finding the pkey value 0x0002 at the pkey index 2 in the ports
> with guids 0x5678 and 0x9012 where as port with guid 0x2468 has the
> same pkey value i.e.0x0002 at different pkey index i.e. 1.
> Shouldn't the pkey value 0x0002 be loaded at the pkey index 2 in the
> port with guid 0x2468?

No; there is no requirement for a pkey value to be in the same index
in different ports.

>
> regards,
> Mahesh
> _______________________________________________
> general mailing list
> general at lists.openfabrics.org
> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
>