[ofa-general] Problem running SDP apps using OFED 1.2
Zulfi Imani
zulfiimani at gmail.com
Fri Oct 5 15:26:07 PDT 2007
For machine#1 my IPoIB interface is
ib0 Link encap:InfiniBand HWaddr
80:00:00:03:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
inet addr:140.221.37.32 Bcast:140.221.37.255 Mask:255.255.255.0
inet6 addr: fe80::211:7500:ff:d802/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:65520 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:5 overruns:0 carrier:0
collisions:0 txqueuelen:128
RX bytes:0 (0.0 b) TX bytes:68 (68.0 b)
For machine#2 my IPoIB interface is
ib0 Link encap:InfiniBand HWaddr
80:00:00:02:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
inet6 addr: fe80::211:7500:ff:d7f2/64 Scope:Link
UP BROADCAST MULTICAST MTU:65520 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:21 overruns:0 carrier:0
collisions:0 txqueuelen:128
RX bytes:0 (0.0 b) TX bytes:68 (68.0 b)
Can you please tell me what the IPoIB IP addresses are for these two
machines ? Also I do not know the IPv4 address for ib0 of machine#2 is not
showing up ?
On 10/5/07, Scott Weitzenkamp (sweitzen) <sweitzen at cisco.com> wrote:
>
> Can you ping between the two nodes using the IPoIB IP address?
>
> Scott Weitzenkamp
> SQA and Release Manager
> Server Virtualization Business Unit
> Cisco Systems
>
>
> ------------------------------
> *From:* general-bounces at lists.openfabrics.org [mailto:
> general-bounces at lists.openfabrics.org] *On Behalf Of *Zulfi Imani
> *Sent:* Friday, October 05, 2007 3:01 PM
> *To:* dotanb at dev.mellanox.co.il
> *Cc:* general at lists.openfabrics.org
> *Subject:* Re: [ofa-general] Problem running SDP apps using OFED 1.2
>
> Hi Dotan,
>
> ifconfig shows up
>
> ib0 Link encap:InfiniBand HWaddr
> 80:00:00:03:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
> inet addr: 140.221.37.32 Bcast: 140.221.37.255 Mask:
> 255.255.255.0
> inet6 addr: fe80::211:7500:ff:d802/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:65520 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1 errors:0 dropped:5 overruns:0 carrier:0
> collisions:0 txqueuelen:128
> RX bytes:0 (0.0 b) TX bytes:68 (68.0 b)
>
> does this mean that the apps would now use IPoIB ? How do i tell when
> IPoIB is working and when it isnt ? Because I assume when it isnt it would
> default to Ethernet ?
>
> It will be great if I can get this cleared.
>
> Thanks
> Zulfi
>
> On 9/30/07, Dotan Barak < dotanb at dev.mellanox.co.il > wrote:
> >
> > Does a simple "ping" between the nodes is working?
> > (this way you can be sure that IPoIB is working and SDP should work)
> >
> > Dotan
> >
> >
> > Zulfi Imani wrote:
> > > I have not tried over IPoIB, but opensm is running
> > >
> > > /home/zulfi > sminfo
> > > sminfo: sm lid 1 sm guid 0x11750000ffdaf4, activity count 16220
> > > priority 0 state 3 SMINFO_MASTER
> > >
> > > I also tried a few iband utilities and they all work fine. Not able to
> > > run any socket apps over SDP.
> > >
> > > Thanks
> > > Zulfi
> > >
> > > On 9/27/07, *Jim Mott* < jimmott at austin.rr.com
> > > <mailto:jimmott at austin.rr.com>> wrote:
> > >
> > > Were you able to connect IPoIB between the nodes? Are you sure
> > > opensm was running? I am ashamed to admit that occasionally I
> > > forget to start opensm and wonder why SDP does not connect.
> > >
> > >
> > >
> > > *From:* general-bounces at lists.openfabrics.org
> > > <mailto: general-bounces at lists.openfabrics.org> [mailto:
> > > general-bounces at lists.openfabrics.org
> > > <mailto:general-bounces at lists.openfabrics.org>] *On Behalf Of
> > > *Zulfi Imani
> > > *Sent:* Thursday, September 27, 2007 3:22 PM
> > > *To:* general at lists.openfabrics.org
> > > <mailto: general at lists.openfabrics.org>
> > > *Subject:* [ofa-general] Problem running SDP apps using OFED 1.2
> > >
> > >
> > >
> > > Hi,
> > >
> > > I installed the OFED1.2 stack and am trying to run a simple socket
> > > server and client over the SDP stack. The Infiniband hardware is
> > > QLogic.
> > >
> > > First I set the ENV vars
> > > export LD_PRELOAD=/root/zulfi/iband/INSTALL/lib64/libsdp.so
> > >
> > > export LIBSDP_CONFIG_FILE=/home/zulfi/libsdp.conf
> > >
> > >
> > > The SDP config file has:
> > > *use sdp server * *:*
> > > use sdp client * *:*
> > > *
> > > Then started the socket server and did a 'sdpnetstat -San' and
> > > found that it listed the SDP port on which the server was
> > listening.
> > >
> > > On the client machine too I did the same; exported the variables,
> > > setup the SDP config file and on running the client './client
> > > port# server_machine' it gave me a "network not reachable" error.
> > >
> > > I tried to get some information about the error on the net but
> > > could not find any.
> > >
> > > I then checked the /proc/<pid>/maps file and found that libsdp.so
> > > was being loaded.
> > > also:
> > > /root > lsmod | grep sdp
> > > ib_sdp 120224 3
> > >
> > > Does QLogic support SDP applications ? Or am I missing something
> > > in the SDP config file or do I need to make changes to my code ?
> > >
> > > Any information on this will be a big help.
> > >
> > > Thanks,
> > > Zulfi
> > >
> > >
> > >
> > >
> > >
> > >
> > > --
> > > Regs,
> > > Zulfi
> > >
> > ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > general mailing list
> > > general at lists.openfabrics.org
> > > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
> > >
> > > To unsubscribe, please visit
> > http://openib.org/mailman/listinfo/openib-general
> >
> >
>
>
> --
> Regs,
> Zulfi
>
>
--
Regs,
Zulfi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20071005/9f5244c8/attachment.html>
More information about the general
mailing list