[ofa-general] [PATCH 13 of 17]: add LRO support
Eli Cohen
eli at mellanox.co.il
Mon Oct 8 05:31:01 PDT 2007
> Hi Eli,
>
> Back on April a user having the configuration
>
> A --- 10g --- B --- IB --- C
>
> where node B acts as an IP router having one 10g interface
> and one IB interface reported on a sever bandwidth problem
> which was resolved to be related to the 10g driver have LRO mechanism
> which is not operative under forwarding scheme, see the email/thread
> http://lists.openfabrics.org/pipermail/general/2007-April/035322.html
>
> My question is, does the suggested LRO code need to be disabled when the
> node does forwarding?
>
I did not test such a setup with a host operating as a router between
ipoib and Ethernet networks. Once I do this I will evaluate if there is
a problem and possibly add facilities to disable LRO (probably via
ethtool).
> Indeed you have removed the LSO, LRO patches from the stateless offload
> patch set posting to the upstream kernel, but they do exist in OFED 1.3
>
> Tziporet - I am quite worried from distributing with OFED 1.3 ipoib
> changes (namely LSO and LRO support) which were never reviewed by the
> community and that I understand are not planned for review towards 2.6.24.
>
> What is your thinking on the matter?
>
> Or.
>
> > -----Original Message-----
> > From: general-bounces at lists.openfabrics.org On Behalf Of David Miller
> > Sent: Saturday, April 28, 2007 2:40 AM
> > To: rick.jones2 at hp.com
> > Cc: lawver1 at llnl.gov; netdev at vger.kernel.org; mst at dev.mellanox.co.il; general at lists.openfabrics.org
> > Subject: Re: [ofa-general] Re: IPoIB forwarding
> >
> > From: Rick Jones <rick.jones2 at hp.com>
> > Date: Fri, 27 Apr 2007 16:37:49 -0700
> >
> >> Large Receive Offload (LRO) is enabled by default. This will
> >> interfere with forwarding TCP traffic. If you plan to forward TCP
> >> traffic (using the host with the Myri10GE NIC as a router or bridge),
> >> you must disable LRO. To disable LRO, load the myri10ge driver with
> >> myri10ge_lro set to 0:
> >
> > LRO should be disabled by default if the driver does this. This is a major and unacceptable bug.
> >
> > Thanks for pointing this out Rick.
>
>
> _______________________________________________
> general mailing list
> general at lists.openfabrics.org
> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
More information about the general
mailing list