[ofa-general] RE: [ewg] Running netperf and iperf over SDP

[Moshe Kazir]

I get the same problem on Arbel DDR and ConnectX mlx4.

Switch is DDR , and I repeat the test while no one else used the switch.

As I see it this is not an HCA/hardware problem.

It look like my command/setup error or sdplib problem .

Moshe

____________________________________________________________
Moshe Katzir   |  +972-9971-8639 (o)   |   +972-52-860-6042  (m)
 
Voltaire - The Grid Backbone
 
 www.voltaire.com

  


-----Original Message-----
From: Tziporet Koren [mailto:tziporet at dev.mellanox.co.il] 
Sent: Sunday, October 28, 2007 9:56 PM
To: Moshe Kazir
Cc: ewg at lists.openfabrics.org; general at lists.openfabrics.org; Moni Levy;
Alon Verner
Subject: Re: [ewg] Running netperf and iperf over SDP


Moshe Kazir wrote:
> While running netperf and iperf over SDP I get unstable Performance 
> results.
>
>
> The test run on x86_64 , sles 10 sp1 , OFED-1.2.5
>
>
>   
Which HCA are you using?
Tziporet