[ofa-general] can not join due to rate:2.5Gbps < group:10Gbps?
Brian J. Murrell
Brian.Murrell at Sun.COM
Fri Apr 4 07:36:59 PDT 2008
I'm trying to get a few nodes here connected with IPoIB. On the first
node I have tried with, after ifconfig'ing the interface into the
network with other IPoIB nodes I cannot seem to ping any other nodes. I
ran ibdiagnet and got a /tmp/ibdiagnet.pkey file with the following
contents:
sata14:/ # cat /tmp/ibdiagnet.pkey
GROUP PKey:0x7fff Hosts:4
Full sata15/P2 lid=0x0004 guid=0x00066a01a0000363 dev=23108
Full sata14/P2 lid=0x0006 guid=0x00066a01a00002bf dev=23108
Full sata23/P2 lid=0x0008 guid=0x00066a01a00002fe dev=23108
Full sata16/P2 lid=0x0007 guid=0x00066a01a00002c1 dev=23108
When I run an "ibdiagpath -l 0x0004" I get the following:
-W- Topology file is not specified.
Reports regarding cluster links will use direct routes.
-I- Using port 2 as the local port.
-I---------------------------------------------------
-I- Traversing the path from local to destination
-I---------------------------------------------------
-I- From: lid=0x0006 guid=0x00066a01a00002bf dev=23108 sata14/P2
-I- To: lid=0x0001 guid=0x00066a00c8000180 dev=5 Port=1
-I- From: lid=0x0001 guid=0x00066a00c8000180 dev=5 Port=2
-I- To: lid=0x0004 guid=0x00066a01a0000363 dev=23108 sata15/P2
-I---------------------------------------------------
-I- PM Counters Info
-I---------------------------------------------------
-I- No illegal PM counters values were found
-I---------------------------------------------------
-I- Path Partitions Report
-I---------------------------------------------------
-I- Source sata14/P2 lid=0x0006 guid=0x00066a01a00002bf dev=23108 Port 2
PKeys:0xffff
-I- Destination sata15 lid=0x0004 guid=0x00066a01a0000363 dev=23108 PKeys:0xffff
-I- Path shared PKeys: 0xffff
-I---------------------------------------------------
-I- IPoIB Path Check
-I---------------------------------------------------
-I- Subnet: IPv4 PKey:0x7fff QKey:0x00000000 MTU:2048Byte rate:10Gbps SL:0x00
-W- Port sata14/P2 lid=0x0006 guid=0x00066a01a00002bf dev=23108 can not join due
to rate:2.5Gbps < group:10Gbps
-W- Port sata15/P2 lid=0x0004 guid=0x00066a01a0000363 dev=23108 can not join due
to rate:2.5Gbps < group:10Gbps
-E- No IPoIB Subnets found on Path! Nodes can not communicate via IPoIB!
-I---------------------------------------------------
-I- QoS on Path Check
-I---------------------------------------------------
-W- Blocked VLs:4 5 at node:sata14 lid=0x0006 guid=0x00066a01a00002bf dev=23108
port:2
-W- Blocked VLs:4 5 at node: lid=0x0001 guid=0x00066a00c8000180 dev=5 port:2
-I- The following SLs can be used:0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-I- Done. Run time was 0 seconds.
That IPoIB Path Check looks a bit alarming.
Anyone have any suggestions?
b.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20080404/d07b66a4/attachment.sig>
More information about the general
mailing list