[ofa-general] can not join due to rate:2.5Gbps < group:10Gbps?

Brian J. Murrell Brian.Murrell at Sun.COM
Fri Apr 4 08:05:36 PDT 2008


On Fri, 2008-04-04 at 07:55 -0700, Hal Rosenstock wrote:
> 
> Looks like you have a mixed rate set of ports so you need to configure
> the group to 2.5 Gbps.

I'm a bit green with I/B, so please bear with me if you can.  I do
understand that there can be mixed rates depending on hardware.  But the
"hardware guys" assure me the cards in these machines should be able to
do 10Gbps.  Maybe they are wrong.  The card is listing as:

06:00.0 InfiniBand: Mellanox Technologies MT23108 InfiniHost (rev a1)

>  What SM are you using ?

That's a good question.  I suspect it's running on the switch.  I don't
know any details on the switch (yet) though.  I will need to engage the
hardware folks to determine this.  I did get an error when when ran
ibdiagnet about more than 1 master SM running when I started opensmd on
one of the nodes and none of the other nodes are running an SM so that
only leaves the switch.

In my limited exposure to IB, running the SM on the switch has always
yielded bad results.  I will see if I can get them to disable it.

b.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20080404/ff2e4c0d/attachment.sig>


More information about the general mailing list