[ofa-general] MVAPICH2 crashes on mixed fabric

[Mike Heinz]

Wei,

Thanks so much for the tip - I'll give it a try. 


--
Michael Heinz
Principal Engineer, Qlogic Corporation
King of Prussia, Pennsylvania

-----Original Message-----
From: wei huang [mailto:huanwei at cse.ohio-state.edu] 
Sent: Sunday, April 06, 2008 8:58 PM
To: Mike Heinz
Cc: general at lists.openfabrics.org
Subject: Re: [ofa-general] MVAPICH2 crashes on mixed fabric

Hi Mike,

Currently mvapich2 will detect different HCA type and thus select
different parameters for communication, which may cause the problem. We
are working on this feature and it will be available in our next
release.
For now, if you want to run on this setup, please set few environmental
variables like:

mpiexec -n 2 -env MV2_USE_COALESCE 0 -env MV2_VBUF_TOTAL_SIZE 9216
./a.out

Please let us know if this works. Thanks.

Regards,
Wei Huang

774 Dreese Lab, 2015 Neil Ave,
Dept. of Computer Science and Engineering Ohio State University OH 43210
Tel: (614)292-8501


On Fri, 4 Apr 2008, Mike Heinz wrote:

> Hey, all, I'm not sure if this is a known bug or some sort of 
> limitation I'm unaware of, but I've been building and testing with the

> OFED 1.3 GA release on a small fabric that has a mix of Arbel-based 
> and newer Connect-X HCAs.
>
> What I've discovered is that mvapich and openmpi work fine across the 
> entire fabric, but mvapich2 crashes when I use a mix of Arbels and 
> Connect-X. The errors vary depending on the test program but here's an
> example:
>
> [mheinz at compute-0-0 IMB-3.0]$ mpirun -n 5 ./IMB-MPI1 .
> .
> .
> (output snipped)
> .
> .
> .
>
> #---------------------------------------------------------------------
> --
> ------
> # Benchmarking Sendrecv
> # #processes = 2
> # ( 3 additional processes waiting in MPI_Barrier)
> #---------------------------------------------------------------------
> --
> ------
>        #bytes #repetitions  t_min[usec]  t_max[usec]  t_avg[usec] 
> Mbytes/sec
>             0         1000         3.51         3.51         3.51
> 0.00
>             1         1000         3.63         3.63         3.63
> 0.52
>             2         1000         3.67         3.67         3.67
> 1.04
>             4         1000         3.64         3.64         3.64
> 2.09
>             8         1000         3.67         3.67         3.67
> 4.16
>            16         1000         3.67         3.67         3.67
> 8.31
>            32         1000         3.74         3.74         3.74
> 16.32
>            64         1000         3.90         3.90         3.90
> 31.28
>           128         1000         4.75         4.75         4.75
> 51.39
>           256         1000         5.21         5.21         5.21
> 93.79
>           512         1000         5.96         5.96         5.96
> 163.77
>          1024         1000         7.88         7.89         7.89
> 247.54
>          2048         1000        11.42        11.42        11.42
> 342.00
>          4096         1000        15.33        15.33        15.33
> 509.49
>          8192         1000        22.19        22.20        22.20
> 703.83
>         16384         1000        34.57        34.57        34.57
> 903.88
>         32768         1000        51.32        51.32        51.32
> 1217.94
>         65536          640        85.80        85.81        85.80
> 1456.74
>        131072          320       155.23       155.24       155.24
> 1610.40
>        262144          160       301.84       301.86       301.85
> 1656.39
>        524288           80       598.62       598.69       598.66
> 1670.31
>       1048576           40      1175.22      1175.30      1175.26
> 1701.69
>       2097152           20      2309.05      2309.05      2309.05
> 1732.32
>       4194304           10      4548.72      4548.98      4548.85
> 1758.64
> [0] Abort: Got FATAL event 3
>  at line 796 in file ibv_channel_manager.c
> rank 0 in job 1  compute-0-0.local_36049   caused collective abort of
> all ranks
>   exit status of rank 0: killed by signal 9
>
> If, however, I define my mpdring to contain only Connect-X systems OR 
> only Arbel systems, IMB-MPI1 runs to completion.
>
> Can any suggest a workaround or is this a real bug with mvapich2?
>
> --
> Michael Heinz
> Principal Engineer, Qlogic Corporation King of Prussia, Pennsylvania
>
>