[ofa-general] Loading of ib_mthca fails
Roland Dreier
rdreier at cisco.com
Wed Apr 23 12:20:02 PDT 2008
> ib_mthca: Mellanox InfiniBand HCA driver v0.08 (February 14, 2006)
> ib_mthca: Initializing 0000:04:00.0
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:04:00.0 to 64
> ib_mthca 0000:04:00.0: MAP_FA returned status 0xff, aborting.
> ib_mthca 0000:04:00.0: Failed to start FW, aborting.
> ACPI: PCI interrupt for device 0000:04:00.0 disabled
> ib_mthca: probe of 0000:04:00.0 failed with error -22
Strange, I'm not sure what's going on. Some firmware commands are
succeeding and then one fails with a status that the firmware should
never return.
Taking a wild guess about what might be affecting this, how much memory
does your system have installed?
Can you make sure your kernel is built with CONFIG_INFINIBAND_MTHCA_DEBUG=y
and then send the output of loading the driver with the debug_level
module option set to 1?
Thanks,
Roland
More information about the general
mailing list