[ofa-general] Infiniband and Opensuse 10.3 stock rpms

Diego Guella diego.guella at sircomtech.com
Wed Aug 6 03:17:00 PDT 2008


Hi,

I've just installed Opensuse 10.3 on a Dell PowerEdge 2850 server, and updated it as of today (Aug 6, 2008).
I noticed that opensuse has some rpms in its repository, and I was wondering if I could get Infiniband up without installing OFED.
But, I get this error from opensm:
-----
Aug 06 10:15:52 476103 [2340AB00] -> OpenSM Rev:openib-3.0.14
Aug 06 10:15:52 476206 [2340AB00] -> OpenSM Rev:openib-3.0.14
Aug 06 10:15:52 485719 [2340AB00] -> osm_vendor_bind: Binding to port 0x2c9020021c9f1
Aug 06 10:15:52 488535 [2340AB00] -> osm_vendor_open_port: ERR 542C: umad_open_port() failed
Aug 06 10:15:52 488565 [2340AB00] -> osm_vendor_bind: ERR 5424: Unable to open port 0x2c9020021c9f1
Aug 06 10:15:52 488578 [2340AB00] -> osm_sm_mad_ctrl_bind: ERR 3118: Vendor specific bind failed
Aug 06 10:15:52 488593 [2340AB00] -> osm_sm_bind: ERR 2E10: SM MAD Controller bind failed (IB_ERROR)
Aug 06 10:15:52 488614 [2340AB00] -> osm_sa_mad_ctrl_unbind: ERR 1A11: No previous bind
Aug 06 10:15:52 488977 [2340AB00] -> Exiting SM
-----


What's wrong?


Here are some more information on this system:

The Infiniband-related rpms that I have installed are:
infiniband-diags, kernel-default, libibmad, libibumad, libibverbs, libsdp, ofed-kmp-default, opensm

-----
Server19:~ # lsmod
Module                  Size  Used by
ib_umad                32792  0 
iptable_filter         19840  0 
ip_tables              37848  1 iptable_filter
ip6table_filter        19584  0 
ip6_tables             31944  1 ip6table_filter
x_tables               37000  2 ip_tables,ip6_tables
microcode              31256  0 
firmware_class         27520  1 microcode
apparmor               58544  0 
loop                   36356  0 
dm_mod                 77152  0 
ib_ipoib               89160  0 
ib_cm                  51480  1 ib_ipoib
ib_sa                  57688  2 ib_ipoib,ib_cm
ipv6                  372600  35 ib_ipoib
rtc_cmos               25016  0 
rtc_core               38156  1 rtc_cmos
floppy                 79624  0 
rtc_lib                19968  1 rtc_core
sr_mod                 33444  0 
iTCO_wdt               28624  0 
serio_raw              24068  0 
cdrom                  52392  1 sr_mod
iTCO_vendor_support    20740  1 iTCO_wdt
usbhid                 58160  0 
hid                    43776  1 usbhid
ff_memless             22536  1 usbhid
ib_mthca              141540  0 
ib_mad                 54436  4 ib_umad,ib_cm,ib_sa,ib_mthca
ib_core                76032  6 ib_umad,ib_ipoib,ib_cm,ib_sa,ib_mthca,ib_mad
e1000                 203200  0 
shpchp                 50716  0 
pci_hotplug            49396  1 shpchp
e752x_edac             28036  0 
edac_mc                43584  1 e752x_edac
button                 26528  0 
sg                     53304  0 
ehci_hcd               50956  0 
uhci_hcd               42144  0 
usbcore               156456  4 usbhid,ehci_hcd,uhci_hcd
sd_mod                 45824  3 
edd                    26760  0 
ext3                  156688  1 
mbcache                26248  1 ext3
jbd                    89192  1 ext3
fan                    22792  0 
mptspi                 36112  2 
mptscsih               39680  1 mptspi
mptbase                73952  2 mptspi,mptscsih
scsi_transport_spi     43776  1 mptspi
ata_piix               37636  0 
libata                166800  1 ata_piix
scsi_mod              176536  7 sr_mod,sg,sd_mod,mptspi,mptscsih,scsi_transport_spi,libata
thermal                36112  0 
processor              59720  1 thermal
-----

-----
Server19:~ # ibstat
CA 'mthca0'
        CA type: MT25208
        Number of ports: 2
        Firmware version: 5.1.400
        Hardware version: a0
        Node GUID: 0x0002c9020021c9f0
        System image GUID: 0x0002c9020021c9f3
        Port 1:
                State: Active
                Physical state: LinkUp
                Rate: 20
                Base lid: 4
                LMC: 0
                SM lid: 1
                Capability mask: 0x02510a68
                Port GUID: 0x0002c9020021c9f1
        Port 2:
                State: Down
                Physical state: Polling
                Rate: 10
                Base lid: 0
                LMC: 0
                SM lid: 0
                Capability mask: 0x02510a68
                Port GUID: 0x0002c9020021c9f2
-----


Any advice is greatly appreciated.
Thanks,
Diego
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20080806/da6c0c9e/attachment.html>


More information about the general mailing list