[Stgt-devel] [ewg] Re: [ofa-general] [ANNOUNCE] open iSCSI over iSER target RPMis available
Erez Zilber
erezz at Voltaire.COM
Sun Feb 10 06:06:31 PST 2008
Joe Landman wrote:
>
> Erez Zilber wrote:
> >>> * READ: 920 MB/sec
> >>> * WRITE: 850 MB/sec
> >> Not getting anything even remotely close to this. Are there more
> >> details on configuration somewhere? I followed the web page as
> indicated.
> >>
> >
> > Are you running iSCSI over TCP or iSCSI over iSER (over InfiniBand)? Our
> > results are with iSER.
>
> I followed the instructions on the web pages that were pointed to for
> iSER. Are there updated pages?
>
For the initiator side, you can see the documentation that comes with
OFED. For the target side, use the wiki page (updated it only last week):
https://wiki.openfabrics.org/tiki-index.php?page=ISER-target
I saw that you were asking about a RPM. There are RPMs for SuSE & RedHat
on the wiki page. These RPMs will be included in OFED 1.4.
Erez
> Is there a way to tell whether or not
> the RDMA path is being used?
>
Yes - on the initiator side, do the following:
seed1:~ # iscsiadm -m session
iser: [1] 192.168.10.63:3260,1 iqn.2001-04.com.noni-seed1
You can see that iSER is used.
On the target side, do the following:
noni:~ # tgtadm --lld iscsi --op show --mode target
Target 1: iqn.2001-04.com.noni-seed1
System information:
Driver: iscsi
Status: running
I_T nexus information:
I_T nexus: 1
Initiator: iqn.seed1
Connection: 0
RDMA IP Address: 192.168.10.81 <-- "RDMA IP Address"
means that iSER is used
LUN information:
LUN: 0
Type: controller
SCSI ID: deadbeaf1:0
SCSI SN: beaf10
Size: 0
Online: Yes
Poweron/Reset: Yes
Removable media: No
Backing store: No backing store
LUN: 1
Type: disk
SCSI ID: deadbeaf1:1
SCSI SN: beaf11
Size: 82G
Online: Yes
Poweron/Reset: No
Removable media: No
Backing store: /dev/sds
Account information:
ACL information:
ALL
Erez
More information about the general
mailing list